Steel Structure Warehouse wholesale- China Factory Suppliers Manufacturers

The advantages of industrial steel building are high seismic performance, good fire resistance, short construction period, and durability. Compared with traditional factory buildings, industrial steel building has improved a lot, so it is strongly welcomed by the market.

• What are the types of single-structure industrial steel building?

• What are the advantages of single-structure industrial steel building?

• What are the advantages of industrial steel building construction?

What are the types of single-structure industrial steel building?

1. From the height:

The height of the drip level of a single-storey factory building is very important. Some factory buildings are 4-5 meters high, some are 6-7 meters, and some can be as high as 11-12 meters or higher. Generally, the taller the factory building, the more difficult it will be to build, and the more expensive the material costs will be.

2. From the external building structure:

Simple iron sheet: It is the simplest, a factory built with iron sheet relatively freely.

Steel structure workshop: The steel structure workshop is divided into steel structure or ordinary steel structure. Color steel structure is more than ordinary

much better.

Concrete structure: The wall is built with bricks and the roof is sealed with concrete. This structure has better safety and heat insulation than the previous two.

3. From the internal structure:

It is divided into those with corbels and those without corbels. Only the workshops with corbels can install cranes (also called cranes). This is an important part of industrial production. If there are machinery and equipment to install cranes, just Must have corbels to use.

What are the advantages of single-structure industrial steel building?

industrial steel building has the characteristics of forming a large space for use, easily meeting the requirements of the production process, and convenient internal transportation organization, which is conducive to the placement of heavier production equipment and products, and can realize the industrialization of the production of plant building components and the mechanization of on-site construction. Therefore, industrial steel building has been widely used in industrial buildings such as metallurgy, machinery manufacturing, motor manufacturing, chemical and textile industries. Common structural forms of reinforced concrete single-story factory buildings include bent frame structure and rigid frame structure.

What are the advantages of industrial steel building construction?

1. industrial steel building has good structural performance, light weight, high strength, and good seismic performance.

2. The steel used in industrial steel building is recyclable, which is more energy-efficient and environmentally friendly than masonry and concrete.

3. The industrial steel building is processed by the factory, so the quality of the industrial steel building is guaranteed.

4. industrial steel building materials have light weight and low base cost.

5. The on-site construction period of industrial steel building is short. There is basically no wet work on site, and no dust, sewage and other pollution will be generated.

6. The cross-section of structural components is small, the pillars are very thin, the walls are very thin, and the building area is large.

Qingdao Xinguangzheng Steel Structure Co., Ltd. has been committed to providing customers with reliable industrial steel buildings and perfect after-sales service so that customers can invest easily, use them with confidence, and have no worries.

Steel structures are a new type of construction system that offers the benefits of low weight, easy installation, short construction time, good seismic performance, fast investment recovery and low environmental pollution. It is therefore generally preferred by all parties in the industry. Under the call for green construction, energy saving, environmental protection and resource recycling, steel structures have gradually become widespread in agricultural steel building and the scale of the steel construction industry has expanded further.

• What are the requirements for the operating equipment of agricultural steel building?

• What are the technical requirements for agricultural steel building?

• What are the construction requirements for agricultural steel building?

What are the requirements for the operating equipment of agricultural steel building?

1. The machinery and equipment of the agricultural steel building are operated and maintained by designated personnel, and the operating certificates are complete.

2. Mechanical operation part and on-site electricity requirements:

a. The rotation and dangerous parts of various machines and electric machinery must be equipped with protective devices.

b. Electrical equipment and wiring must be well insulated, with rain-proof and moisture-proof facilities.

c. The electrical box has a door, color code and number, which meet the installation height. The high-voltage leakage protector and zero grounding are complete. The switch box and electrical equipment must be "one machine, one switch, one leakage", and the fuse and actual equipment load Match.

d. When installing electrical equipment, the switches, circuits, grounding devices, etc. must be inspected, and they must be intact and undamaged, with good insulation.

What are the technical requirements for agricultural steel building?

(1) The agricultural steel building has a reasonable structure, a 360-degree undercut connection, and no bolts on the roof, which completely avoids water seepage and water leakage.

(2) Adopt self-fixing bolts to fix, simplify the operation and greatly reduce the labor intensity of workers. There is no need to set up a scaffold fixing nut, which improves the safety of operation.

(3) The boom of agricultural steel building is detachable and the angle can be adjusted freely, which is suitable for simultaneous construction of arch roofs with multiple spans.

What are the construction requirements for agricultural steel building?

1. First, according to the functional requirements of agricultural steel building, adopt a corresponding reasonable structure system. Achieve advanced technology, novel structure, and achieve the unity of architecture and structure.

2. The agricultural steel building is mostly based on rods, so the size of the rods is as modular and standardized as possible, which is convenient for mechanized manufacturing, transportation, installation, and improves productivity.

3. The agricultural steel building adopts high-efficiency steel with high economic indicators.

4. The nodes of agricultural steel building are very important. Appropriate connection methods should be adopted to make the node design consistent with the simplified structural calculation model. In the past, most of the structural damage occurred at the nodes, so the nodes must be carefully designed and constructed. Advanced and reliable connection methods are used.

Qingdao Xinguangzheng Steel Structure Co., Ltd. employs more than 100 workers, through the efforts of their entire staff, the agricultural steel buildings of high quality, widely used in a variety of architecture, have shared the broad masses of the worldwide market for over a decade.

Project Introduction:

Solomon office project is a two-story frame structure, with a building area of more than 1500 square meters. The first floor is maintained as aluminum-plastic plate curtain wall and part of glass curtain wall, the second floor is maintained as glass curtain wall, the roof is glass wool composite plate, and the parapet part is aluminum-plastic plate.

 

Personnel involved in design and construction refinement: Liu Kangning, Jing Yanyan

Total project amount: 2.94 million

 

Detailed address: Honiara, Solomon Islands

The following project related parameters:

Area: 1500 square meters

Eave height: 7M

Ridge height: 8M

Number of floors: two

Wind speed: 176km / h

Load: second floor load: 450kg / m2, roof: 30kg / m2

Shapes: Framing

Steel consumption: 90 tons

Purpose: Salomon Telekom office and warehouse

 

 

Detail of Prefabricated Steel Structure Building Office in Solomon

 

Main Characters of prefab steel warehouse

· Super Aseismatic

Most part of the structure will be consisted of cold formed steel members, this system aseismatic grade can reachto 8.

· Wind Resistance

Steel structure building has the performance of high strength, solid rigidity and good deformation capacity, can resist strong wind for 50m/s.

·Durable

The steel material will be painted or galvanized as customers' requirement to be more anticorrosion and rustproof, the lifespan of the structure can be reach to 50~70 years.

·Heat Insulation

Sandwich panel can improve the insulation performance of the building, effectively avoid the phenomenon of "cold bridge" wall

·Environment Protection

Little waste for pollution in construction, 100% steel structure materials can be recycled, most of other related materials also can be recycled.

·Easy and Fast Build

Dry construction, will not influenced by the weather and environment, save much time and labor cost. One 300m2 steel structure building, can be finished in 30 days by only 5 workers.

Specification

Project address: Argentina

Area: 5930m2

Time: 2009

Introduction: the project covers a total area of 5930 square meters, with three attached spans in the main workshop and eight two ton cranes. The construction started in October 2009, and the project site is not suitable for canuelas in North Aires, Argentina. It took more than two months to complete, and the project is in good condition at present.

 

We supply designing, manufacturing and installationabout the whole steel structure workshop building project.

 

Detail Information

Roof with a single layer of galvanized steel plate sea blue crown Island, its structure and technical requirements are as follows:

1.V820 type 0.50mm thick galvanized roof panel (sea blue) crown Island

2.75mm thick glass wool with aluminum foil

3.200 * 200 coated steel mesh

4.Q235B C-type steel roof purlin

5.Q345B steel beam 

Wall:

1.YX-840 plate type 0.40mm thick galvanized wall panel white gray crown Island

2.Q235B C steel wall purlins

3.Q345B steel column

Paint coating:

1. Shot blasting, rust level Sa2.5

2. In the gray anti-corrosion primer two, each 30 um

other:

1. Roof panel - sea blue

2. Wall panel - white gray

3. Steel components - medium gray  

The main material of commercial steel building is light steel keel synthesized from hot-dip galvanized steel strip through cold rolling technology. After accurate calculation and support and combination of auxiliary parts, it has reasonable bearing capacity and can replace traditional houses.

• What are the progress of commercial steel building?

• What is the future development of commercial steel building?

• What are the necessary steps in the commercial steel building construction process?

What are the progress of commercial steel building?

1. The house has good safety performance. commercial steel building is anti-seismic, anti-typhoon, fire-proof and anti-insect and ants. The service life of the main building body can reach 90 years, the overall performance is good, it is not easy to be destroyed by earthquake force, and the building quality and safety performance are better.

2. The house is low-carbon, energy-saving, green and environmentally friendly, and can be reused. The steel of commercial steel building can be recycled and has little impact on the environment during construction and dismantling. Most of the other supporting materials can also be recycled, which meets the requirements of environmental protection; moreover, most of the materials are green building materials, which can meet the requirements of the ecological environment and are beneficial to health. 

What is the future development of commercial steel building?

The steel structure used in commercial steel building will continue to develop into high-strength steel, which will greatly increase its yield point strength; in addition, new types of steel must be rolled, such as H-shaped steel (also known as wide flange steel) and T-shaped steel and profiled Steel plates, etc. to meet the needs of large-span structures and super high-rise buildings.

Steel structure is divided into light steel and heavy steel. There is no uniform standard for judging, and many experienced designers or project managers often cannot fully explain. They can be comprehensively considered and judged based on some data.

What are the necessary steps in the commercial steel building construction process?

1. Purge device

This device uses a high-pressure fan, and multiple sets of elastic blowing nozzles with different angles are arranged in the auxiliary chamber of the chamber to blow and clean the projectiles remaining on the surface of the workpiece.

2. Import and export sealing

The inlet and outlet sealing devices of the workpiece are all made of rubber spring steel plate. In order to prevent the projectile from splashing out of the cleaning room during shot blasting, there are multiple reinforced seals at the inlet and outlet of the workpiece, which are characterized by strong elasticity, long life, and sealing effect. Superb.

3. Dust removal system

The dust removal system is mainly composed of a bag filter, a fan, and a dust removal pipeline. The dust removal efficiency can reach 99.5%.

This is the relevant knowledge about the commercial steel building for you to get more information about it. If you want to order a commercial steel building, you must choose Qingdao Xinguangzheng Steel Structure Co., Ltd., because they can provide the commercial steel building with most high-quality and suitable price.

Generally speaking, Steel building accessories include: steel column systems, steel beam systems, support systems, connection systems, purlin systems, and brace stairs. This is a part and an indispensable part of every steel structure project.

• What are the advantages of using Steel building accessories?

• How to paint Steel building accessories?

• What may cause the deformation of Steel building accessories?

What are the advantages of using Steel building accessories?

1. Health

In the process of using Steel building accessories, dry construction is used to reduce the environmental pollution caused by waste. The Steel building accessories of the house can be 100% recycled, and most of other supporting materials can also be recycled, which is in line with the current awareness of environmental protection; All materials are green building materials, which meet the requirements of ecological environment and are conducive to health.

2. Comfort

The wall is built by Steel building accessories, and the high-efficiency energy-saving system is adopted, which has breathing function and can adjust the dry humidity of indoor air; The roof has ventilation function, which can form a flowing air room over the house to ensure the ventilation and heat dissipation requirements inside the roof.

3. Fast

All dry operations shall be carried out without being affected by environmental seasons. A building of about 300 square meters only needs 5 workers and 30 working days to complete the whole process from foundation to decoration.

4. Environmental protection

Materials can be 100% recycled, truly green and pollution-free.

5. Energy saving

All adopt high-efficiency and energy-saving walls, with good thermal insulation, heat insulation and sound insulation effects, which can reach the energy-saving standard of 50%.

How to paint Steel building accessories?

(1) Method of painting construction:

There are two commonly used methods in Steel building accessories maintenance engineering, namely, painting method and spraying method.

(2) Matters needing attention:

1) The base layer should be thoroughly cleaned before painting, and kept dry, and the first coat of primer should be applied as soon as possible within no more than 8h.

2) When applying the primer, choose an appropriate painting method according to the size of the area.

3) When painting the top coat, it should be painted according to the color and variety requirements of the design, and the painting method is the same as the primer painting method.

4) Painting environment

5) The thinner should be used correctly.

What may cause the deformation of Steel building accessories?

(1) The actual dynamic load of Steel building accessories exceeds the maximum load (commonly known as "overload") allowed during the design of the steel structure.

(2) Bearing the impact of dynamic load for a long time.

(3) The impact of natural disasters (such as earthquakes) or uneven settlement of foundations.

(4) Improper use and maintenance or breakage of Steel building accessories due to mechanical damage and withdrawal from work, resulting in an abnormal deformation of the steel structure due to unbalanced forces.

Qingdao Xinguangzheng Steel Structure Co., Ltd. is known for high precision Steel building accessories. And you can connect them.

Prefab House refers to the use of industrial production methods to build houses, that is, the stairs, exterior walls, balconies, air-conditioning panels, etc. of the house are all prefabricated in the factory outside the construction site, and then shipped to the construction site for "assembly", and the interior of the house will be refined at one time. Handed over after renovation. That is, the huge external walls, stairs, and balconies from the factory are "assembled" on the construction site into houses and buildings.

• What are the advantages of a Prefab House?

• What are the structural types of Prefab Houses?

• What should we be careful about when selecting a Prefab House?

What are the advantages of a Prefab House?

1. Safe and reliable

The Prefab House with steel as the main building material has a high capacity per volume unit, is more stable and solid than the traditional brick and brick concrete technology, has a better seismic performance, wind resistance, water density and refractory performance and also has thermal insulation and sound protection functions. Steel has good ductility and can better use the energy brought in by earthquakes, so it has good seismic performance and a high structural security t hat guarantees the safety of stay.

2. Easy construction and short construction time

All components are prefabricated in the factory and only have to be installed on site, which greatly shortens the construction cycle. A 6000-square-metre-long building can basically be installed in 40 days.

What are the structural types of Prefab Houses?

1. Structural system

The structure of the Prefab House can be divided into: steel frame system, steel frame support system, steel frame-core tube system, steel frame-module-core tube system and steel frame-shear-wall system. With the continuous development of the technology, newer steel construction systems will also appear.

2. Peripheral protection system

The outer protective system of the Prefab House can be divided into blocks, plates, cans and other types.

3. Internal system

Traditional construction has many disadvantages. For example, the traditional rough decoration method does not separate the interior system and the structural system, which makes it difficult to adapt to the modern development of the housing industry; the house technology lines are not separated and the water and power lines are buried in the support layer, which the "century residence" cannot realize." The waste of social resources is serious.

What should we be careful about when selecting a Prefab House?

1.The costs are relatively higher than in the traditional Prefab House made of brick concrete and concrete.

2. The steel structure of the Prefab House, with its unique steel structure, walls, roofs and other materials, as well as the standardized and final internal distribution and support facilities, is difficult to adapt to the habits of people "arbitrarily handling the house".

3. Corrosion of steel: Al-galvanized steel must be used for maximum corrosion protection and the main steel structure can reach fifty years.

4. There are many requirements for new materials. The structure of steel houses is equipped with materials such as thermal insulation and heat protection, usually using new lightweight materials.

Prefab Houses produced by Qingdao Xinguangzheng Steel Structure Co., Ltd. feature attractive appearance, excellent performance, user-friendly operation, easy maintenance, and internationally advanced performance indicators, and are exported to more than 10 countries and regions.

Production introduction

Project Name: Sri Lanka Steel Structure Senior Resort Hotel

Project area: 110 square meter per unit

Project location: Sri lanka

Project Overview: As a second floor Resort, wall panel is cement sandwich panel as insulation, and the surface is painting with real stone paint. The roof is UPVC composite tile. Iron fences and stairs also is our company product.

Bonnyville Welding Ltd. 61232 Rng Rd 461, Bonnyville, AB T9N 2J3 Get directions. Call. We are constantly improving to be your choice for a reliable, safety oriented oilfield construction and maintenance company to more... Steel Fabricators, Oil Field Services.

Houser Steel - Steel Structure, Light Gauge, Steel Dubai We Use Steel structures to Build Trust We'll help get the job done! About Us Who we are Houser Steel is a contracting company in Dubai that specially established to target the market needs for fast-track, affordable and high quality building solutions.

Here at Parkside Steel, we are proud to say we are one of the most comprehensive steel stockholders in the UK, with an almost unrivalled product range held under one roof. We carry Engineering Steels, including Bright, Black, Carbon and Alloy Steels, along with General Steels including Merchant Bar, Hollow Sections, Plates and Sheets.

Back Home > About Us > Our Factory Seamless Carbon Steel Pipe Factory: 1.Covering area:150000㎡ 2.Over 300 workers 3.Annual output:200000 tonnes for carbon steel seamless pipe 4.State-of-the-art facilities 5.Strict quality control 6.Partnerships:PDVSA,NIOC,CNPC,SINOPEC..etc.

Structures General Fabrication As a structural steel and galvanized steel beam supplier, we offer the following beams in various common sizes, and in black or galvanized finish: Wide Flange I Beam Tee Beam We can also provide CNC processing of structural steel beam as a value-added service, including: Cut-to-length Rat holes Coping Beveling Slots

29/9/2020· host是如果是本机那就是127.0.0.1，至于端口取决你的代理设置 注意，添加上httpsAgent的时候，需要设置 proxy 为 false，这一点很重要 const axios = require("axios"); const HttpsProxyAgent = require("https-proxy-agent"); // const httpsAgent = new HttpsProxyAgent(`http://

Brand General Steel Available Products I-Beam Framing: 26 Gauge Sheeting Add Colors Roof, Walls and Trim I-Beam Structural Warranty 50 Years Paint Warranty 40 Years Galvalume Roof Warranty 25 Years Standing Seam Roof Warranty 20 Years Project Coordinator Included at No Additional Cost Customizing Your Aircraft Hangar with Our Team

22/5/2022· Strategic Canada Steel structure import market intelligence. Access 7134 detailed Bills of lading with complete information of each shipment. Schedule a Demo × Home About Us Contact Us Features Countries Global Products Pricing Sign In Sign Up for Free ...