Steel Office OEM price- Manufacturers Suppliers Factory From China

Introduction of Pakistan Prefabricated Steel Structure Construction Chemical Factory

 

Project Area: 4225 ㎡

Project Finished Time: Built in 2019-2020

Project Location: Lahore

Project Detail: Multi-story steel structures

Project Total Steel weight: 600 tons.

 

Project picture of Pakistan Prefabricated Steel Structure Construction Chemical Factory

Company information of Pakistan Prefabricated Steel Structure Construction Chemical Factory

 

A brief introduction to you about our company first, then you can contact me if there is suitable project in the future.

1200 workers, 360000 ㎡ non-dust workshop, 25 years experience, CE, ISO9001, ISO9712, ISO3834, BV, SGS certificated, one hour reach Qingdao port, our company, as a manufacture, this is how we keep good quality and competitive prices for global valued customers.

We provide steel building design, farm house design, manufacture and installation service.

Steel structures are a new type of construction system that offers the benefits of low weight, easy installation, short construction time, good seismic performance, fast investment recovery and low environmental pollution. It is therefore generally preferred by all parties in the industry. Under the call for green construction, energy saving, environmental protection and resource recycling, steel structures have gradually become widespread in agricultural steel building and the scale of the steel construction industry has expanded further.

• What are the requirements for the operating equipment of agricultural steel building?

• What are the technical requirements for agricultural steel building?

• What are the construction requirements for agricultural steel building?

What are the requirements for the operating equipment of agricultural steel building?

1. The machinery and equipment of the agricultural steel building are operated and maintained by designated personnel, and the operating certificates are complete.

2. Mechanical operation part and on-site electricity requirements:

a. The rotation and dangerous parts of various machines and electric machinery must be equipped with protective devices.

b. Electrical equipment and wiring must be well insulated, with rain-proof and moisture-proof facilities.

c. The electrical box has a door, color code and number, which meet the installation height. The high-voltage leakage protector and zero grounding are complete. The switch box and electrical equipment must be "one machine, one switch, one leakage", and the fuse and actual equipment load Match.

d. When installing electrical equipment, the switches, circuits, grounding devices, etc. must be inspected, and they must be intact and undamaged, with good insulation.

What are the technical requirements for agricultural steel building?

(1) The agricultural steel building has a reasonable structure, a 360-degree undercut connection, and no bolts on the roof, which completely avoids water seepage and water leakage.

(2) Adopt self-fixing bolts to fix, simplify the operation and greatly reduce the labor intensity of workers. There is no need to set up a scaffold fixing nut, which improves the safety of operation.

(3) The boom of agricultural steel building is detachable and the angle can be adjusted freely, which is suitable for simultaneous construction of arch roofs with multiple spans.

What are the construction requirements for agricultural steel building?

1. First, according to the functional requirements of agricultural steel building, adopt a corresponding reasonable structure system. Achieve advanced technology, novel structure, and achieve the unity of architecture and structure.

2. The agricultural steel building is mostly based on rods, so the size of the rods is as modular and standardized as possible, which is convenient for mechanized manufacturing, transportation, installation, and improves productivity.

3. The agricultural steel building adopts high-efficiency steel with high economic indicators.

4. The nodes of agricultural steel building are very important. Appropriate connection methods should be adopted to make the node design consistent with the simplified structural calculation model. In the past, most of the structural damage occurred at the nodes, so the nodes must be carefully designed and constructed. Advanced and reliable connection methods are used.

Qingdao Xinguangzheng Steel Structure Co., Ltd. employs more than 100 workers, through the efforts of their entire staff, the agricultural steel buildings of high quality, widely used in a variety of architecture, have shared the broad masses of the worldwide market for over a decade.

The China Flower Fair, which was founded by our company in 1987, is the largest, highest-grade and most influential national flower event in China, and is known as the "Olympic" in the Chinese flower industry. Nowadays, there are many characteristic flower and tree fairs all over the country, such as China (Xiaxi) flower and tree Festival, China Flower Trade Conference, Zhengzhou International Flower and horticulture exhibition, Xiaoshan flower and tree Festival, Shuyang flower and tree Festival, etc.

Project picture of Steel Structure Conference center of China flower Expo.

Qingdao Xinguangzheng Company suppiler of Steel Structure Conference center of China flower Expo.

1200 workers, 360000 ㎡ non-dust workshop, 25 years experience, CE, ISO9001, ISO9712, ISO3834, BV, SGS certificated, one hour reach Qingdao port, our company, as a manufacture, this is how we keep good quality and competitive prices for global valued customers.

We provide steel building design, farm house design, manufacture and installation service.

Step 1: Cutting

Cut steel plate into pieces and connections by flame cutting machines (CNC, Semi-automatic flame cutting machines). Long strips will be used as web and flange plate, connections will be used as connected, reinforced or stiffening plate.

 

Step 2: Assembly

Combine web and flange plate together through H-beams assembly machine, make tack welding. Keep the web plate in the middle line, do not be off the center line.

 

Step 3: Gantry automatic submerged arc welding

Make welding by gantry submerged arc welding machine. Make sure the welding sequence and reduce the welding deformation.

 

Step 4: Flange plate of straightening

Start straightening on welding-finished H steel beams by straightening machine.

 

Step 5: Connections process

Make holes on connected pieces by drilling machines. Make sure the hole size and precision.

 

 

 

Step 6: Welding

Welding with CO2. Make sure the weld quality without welding flaw.

 

 

Step 7: Shot blasting

Make shot blasting on steel profiles. Make sure the blasting grade and quality.

 

Step 8: Spray painting

Painting or other anti-corrosion surface treatment.

 

Step 9: Package & Loading

Pack steel structure profiles on steel pallet, which will be easy for loading, transportation and unloading jobs.

 

Prefab House refers to a building where parts and components produced in a factory are assembled and connected at the construction site. Steel structure prefabricated buildings refer to steel structure components produced in factories and assembled and connected at the construction site.

What is Prefab House?

Different countries have different understandings and practices of the housing system, but Prefab House generally refers to the main project of the house. Different residential products are formed due to the selection of different structural materials, structural types and construction methods, and constitute a number of corresponding residential products ranging from design to The complete technology of construction. The steel structure residential building system uses the steel structure form as the basis for the classification of the building system and becomes a branch of the building system.

Why choose Prefab House?

The material of Prefab House has good homogeneity and isotropy, which is an ideal elastic body, which is most in line with the basic assumptions of general engineering mechanics; the material has good plasticity and toughness, can have large deformations, and can well withstand dynamic loads; construction period is short ; It has a high degree of industrialization and can be used for specialized production with a high degree of mechanization; it has high processing accuracy, high efficiency, and good airtightness, so it can be used to build gas tanks, oil tanks, and transformers.

In the future, the steel structure of Prefab House should study high-strength steel to greatly increase its yield point strength; in addition, new types of steel should be rolled, such as H-shaped steel (also known as wide flange steel), T-shaped steel and profiled steel plates, etc. The needs of large-span structures and super high-rise buildings.

What are the characteristics of Prefab House?

(1) Light weight and high strength. Due to the use of steel as the load-bearing structure and new building materials as the enclosure structure, Prefab House generally uses steel structure to build residences that weigh about one-half of the weight of reinforced concrete residences, which reduces the weight of the house and reduces the cost of basic engineering. Since the building area occupied by the vertical force-bearing member is relatively small, the use area of the house can be increased. At the same time, because the steel structure residence adopts a large bay and large depth column network, it provides residents with a large space that can be flexibly separated, which can meet the different needs of users.

(2) The degree of industrialization is high and meets the requirements of industrialization. Most of the structural components of Prefab House are made in factories, which are easy to install and suitable for mass production. This has changed the traditional way of housing construction and realized the transformation from "building houses" to "manufacturing houses". Promoted the transformation of the housing industry from extensive to intensive, and at the same time promoted the development of productivity.

Qingdao Xinguangzheng Steel Structure Co., Ltd. has worked on the production of Prefab Houses for several years. You can find the best Prefab House in this company.

The main structure of the commercial steel building can be installed simultaneously with the wall panel. The main structure and the wall panel are fixed by embedded parts and connectors, which is convenient for installation. It only needs to be hoisted in place, connected and fixed, and the three links of joint treatment are not required. No need for secondary grouting, and has the advantages of short construction period, high assembly rate, good integrity, and good wind pressure resistance.

What are the welding sequence and process parameters of commercial steel building typical nodes?

(1) When the sides of the upper and lower columns without ear plates are symmetrically welded to 1/3 of the plate thickness by two welders on both sides, cut off the ear plates.

(2) Then two welders are symmetrically welded on both sides to 1/3 of the plate thickness on the side where the ear plate is cut off.

(3) Two welders will be responsible for the welding of two adjacent sides.

(4) The joints of the weld bead between every two layers should be staggered with each other, and the weld bead joints welded by two welders should also pay attention to the stagger of each layer. Pay attention to the temperature between the layers during the welding process.

(5) Welding process parameters:

CO2 gas shielded welding: wire diameter Φ1.2mm, current 280～320A, welding speed 350～450mm/min

Extending length of welding wire: about 20mm, gas flow rate 25～80L/min,

Voltage 29～34V, interlayer temperature 120～150℃

What points should be paid attention to when installing commercial steel building?

We must prefabricate and assemble commercial steel building steel components on the steel platform in accordance with the installation sequence and process requirements, and ensure the quality of welding production.

The spacing between the splicing seam of the splicing flange plate and the splicing seam of the web plate of the section steel should be greater than 200 mm. The splicing length of the flange plate shall not be less than 2 times the plate width; the splicing width of the web shall not be less than 300 mm, and the length shall not be less than 600 mm.

In order to facilitate the welding of commercial steel building and ensure the welding quality, try to weld the reinforcement plates, connecting plates, backing plates, and overhanging beams (beams) on the columns and beams on the ground steel platform according to the dimensions of the construction drawings.

In addition to the fabrication and assembly of steel components prefabricated on the steel platform according to the construction drawings and specifications, the process and installation dimensions of the commercial steel building on-site installation should also be considered.

What is the social significance of commercial steel building?

The construction of commercial steel building has trained a new generation of construction and installation industrial workers. Factory production and mechanized installation avoid the high dependence of the traditional construction industry on labor, moderately reduce the impact of high labor costs brought on by the aging of the global population on the development of the industry, and predictably cultivate a new generation of construction and installation industry workers. It is of far-reaching significance to the sustainable development of the construction industry.

Qingdao Xinguangzheng Steel Structure Co., Ltd. has focused on the development and production of commercial steel buildings for several years. And it commits to provide perfect service for every customer from all over the world.

Industrial steel building has a wide range of applications and can be used in factories, warehouses, office buildings, stadiums, hangars, etc. to be used. It is suitable not only for single-storey large-space buildings, but also for the construction of multi-storey or high-rise buildings.

• What are the architectural features of industrial steel building?

• What is the reason why more and more people are choosing industrial steel building?

• What types of construction are available for industrial steel buildings?

What are the architectural features of industrial steel building?

Insulation: Avoid heat transfer on both sides of the metal roof to ensure that the ambient air temperature is stable. The thermal protection function is realized by filling thermal protection materials (usually used glass wool and stone wool) under the metal roof plate. The heat conservation effect is expressed by the U-value and the unit is W/M2K. The thermal insulation performance is determined by the following factors: raw material, density and thickness of the thermal insulation cotton; the humidity of the thermal insulation wall, the method of connecting the metal roof plate and the underlying structure (to prevent the phenomenon of the "cold bridge"), the repeated ability of the metal coating to heat radiation.

Daylight: Improve indoor lighting during the day by means of skylights and save energy. When installing daylight panels or daylight glass at certain positions on the metal roof, the duration of the daylight should be adjusted to the metal ceiling panel and the connection between the daylight and the metal ceiling panel should be treated watertight.

What is the reason why more and more people are choosing industrial steel building?

Beautiful: The metal roof of the industrial steel building has a good texture and a pleasant color.

Check the heat expansion and contraction: check the contraction shift and direction of the metal roof plate. Make sure that in areas with high temperature differences the metal roof plate is not damaged by heat expansion and contraction.

Anti-avalanche: install snow barriers on the metal roof in snow-covered areas to prevent a sudden fall of snow.

Anti-ice caps: industrial steel building can prevent rain and snow from forming ice caps on the mould.

What types of construction are available for industrial steel buildings?

The frame of the industrial steel building is the main structure of the system frame. It is a flat structure consisting of columns and frames. All horizontal water loads and most vertical loads are transferred to the foundation via the plant frame. In industrial buildings, the industrial steel building frame has the following three most common types of construction;

1. The single-storey steel structure factory building frame is a single-storey frame formed from the stacked column of the factory building and the frames anchored to the top of the column (the column top can be called the system bent when the column top is foldable).

2. A rigid one-storey frame, a one-storey frame formed by a rigid connection of columns with an equal or gradual cross-section and frames on the top of the column.

3. Multi-layered frame, a multi-layered frame formed by joining columns and floor supports (or specialist works) and roof supports or roof supports.

Having learned so much about industrial steel building, it is also a difficult problem to select from many manufacturers the one with high quality and low price. Qingdao Xinguangzheng Steel Structure Co., Ltd. has been a Chinese pioneer in industrial steel building for several years. You can work with customers from design to completion to ensure that all technical requirements are met.

A lot of work is needed to promote and improve the design specifications and construction technical standards of different types of structures, and to develop new types of lightweight insulation wall materials and the supporting issues of residential components. At the same time, it is necessary to widely publicize the advantages of the development of Residential steel building, so that more developers, designers and users can understand and understand steel structure housing.

• What are the main forms of Residential steel building?

• What are the structural characteristics of these Residential steel buildings?

• What should I pay attention to when using Residential steel building?

What are the main forms of Residential steel building?

Judging from the Residential steel building that has been built, the king has:

1) Thin-walled steel composite wall panel form;

2) Pure frame form;

3) Frame support form;

4) Form of steel-concrete combination;

5) Steel frame-concrete seismic wall form and so on.

What are the structural characteristics of these Residential steel buildings?

The structural forms of Residential steel building have their own characteristics. Among them, the thin-walled steel composite wall panel is particularly suitable for finalized products. The Residential steel building system evolved from the wall panel structure, that is, the thin-walled steel column members are arranged at a distance of about 600mm. The vertical load-bearing structure and section steel have a support system to resist horizontal forces. The floor slab is arranged as a multi-rib support structure according to the position of the vertical section steel. Because the upper structure is a wall-like structure, the foundation is set as a strip foundation according to the force. The foundation requirements are not high.

The thin-walled steel composite wallboard residence is affected by the dense structure, and there are certain restrictions on the size of the partitions, door, door and window openings, and pick-out components.

What should I pay attention to when using Residential steel building?

The latter several forms of Residential steel building can meet the design requirements of multi-story residential buildings, but there is a common problem from the perspective of use, that is, the impact of the prominent beams and columns on the interior look and feel of the residence.

Compared with other buildings, Residential steel building has its particularity. Offices and workshops can use a relatively fixed column network, and the storey height is also higher. The space occupied by the beams and columns is suitable for people. The rules of the column network are conducive to the beams. Layout. On the contrary, the residence is a product with many changes. According to the requirements of the building, a regular column network is rarely arranged. The interior space of the house is relatively small and changes a lot, which is not conducive to the layout of the steel frame.

After seeing this and learning so much information about residential steel structures, I believe you must also want to order a Residential steel building. Qingdao Xinguangzheng Steel Structure Co., Ltd. can provide the best Residential steel building you need. At the same time, their after-sales service is also very considerate.

Product News The UK’s only steel stockholder carrying the following advanced section range. 406 x 140 x 53 kgs/Mtr 406 x 178 x 85 kgs/Mtr 457 x 191 x 106 kgs/Mtr 457 x 191 x 133 kgs/Mtr 457 x 191 x 161 kgs/Mtr 533 x 165 x 66 kgs/Mtr 533 x 165 x 85 kgs/Mtr 533 x 210 x 138 kgs/Mtr 533 x 312 x 150 kgs/Mtr 533 x 312 x 182 kgs/Mtr

29/10/2015· Steel Workshops. Our home workshops are available in any size, to suit your land area and end purpose. Our door solutions are available to suit your access restrictions or needs. Doors can be located in any elevation. As with all of our buildings, we have a standard range of cladding solutions available.

Many retail business owners are starting to restructure the sales of their products and services via the internet. As a result, more businesses demand a warehouse building or distribution center for their goods. Steel buildings are an ideal solution for storage and

INDIA 1-800-114-649 91-11-41507600 91-98186-03311 (Hours: 10:00 am to 6:00 pm IST) Email Us Numbers For Other Locations Need some help? Contact Customer Support Your …

TIMMY Wire Hangers 30 Pack 16.5-Inch Stainless Steel Strong Metal Coat Hanger ,Heavy-Duty, Non-Slip, Space-Saving Clothes Hangers. 971.

Al Khaleel Building Material and Trading is a leading stockist of Structural steel in UAE. PRODUCT. SIZE. SPECIFICATION. Universal Beams. UB 127 x 76 TO 914 x 419. EN 10025 S275 JR BS 4360 Gr. 43A. Universal Columns. UC152 x 152 TO 356 x 406.

Thanks to the advancement in technology, our advancements in design, fabricating and paint systems has enabled us to continue to provide the highest quality, AMERICAN MADE materials

They design the steel structures as per the modern infrastructure norms and regulations. At Pavilion Structures, we strive to maintain a safe environment in the process of steel fabrication and on-site steel structure fabrication. We offer unmatched customer services for several years with transparency, integrity and honesty.