Steel Fabrication supplier- Factory Manufacturers Suppliers From China

Prefab house is a structure mainly made of steel, which is one of the main building structure types. The characteristics of steel are high strength, light weight, and high rigidity, so it is especially suitable for the construction of large-span, super-high and super-heavy buildings.

• Compared with traditional concrete buildings, what are the advantages of Prefab house?

• What are the advantages of Prefab house?

• What is the installation process of Prefab house?

Compared with traditional concrete buildings, what are the advantages of Prefab house?

Compared with prefabricated concrete buildings, Prefab houses have the following advantages:

1. There is no on-site cast-in-place node, the installation speed is faster, and the construction quality is easier to be guaranteed;

2. The steel structure is a ductile material with better seismic performance;

3. Compared with concrete structure, steel structure has lighter weight and lower foundation cost;

4. The steel structure is a recyclable material, which is more green and environmentally friendly;

5. Well-designed steel structure prefabricated buildings are more economical than prefabricated concrete buildings.

6. The cross-section of beams and columns is smaller, and more usable area can be obtained.

What are the advantages of Prefab house?

Save heating costs

Prefab house is more energy-efficient and environmentally friendly when used in the home, such as a new type of thermal insulation layer that has a better thermal insulation effect. When a household measurement is implemented and the heating has the same temperature, the room temperature of the "assembled" space is higher. The head of household may consider lowering the heating temperature, saving heating costs and, at the same time, reducing energy consumption.

Save energy

Finished house is of great benefit for energy saving and environmental protection. Through factory production and on-site assembly, it can significantly reduce building protection and waste water, reduce building noise, reduce harmful gas and dust emissions and reduce building and management personnel on site.

What is the installation process of Prefab house?

The assembly procedure for the steel construction of the Prefab house: steel column assembly -Installation of the supports between the columns -temporary installation of the steel bearer -roof bearings, roof bearings -correction and fixing of the steel bearer -Installation of the maintenance structure.

1. Contamination protection: Avoid rain water entering the metal roof from the outside. Rainwater enters the metal roof mainly through overlapping joints or knots. In order to achieve the function of the centrifuge, it is necessary to use a sealing disc at the screw connection and to make a concealed fixation. Use sealants or welds on the top of the plate. Best use a long board to remove the overlap. Close water-tight treatment for bleeding.

2. Moisture resistant: Avoid condensation of water vapour in the soil and metal wax layer and drain the water vapour in the metal wax layer. The solution is to fill the metal roof with thermal insulation cotton, place a waterproof membrane on the metal floor plate and have ventilated knots on the metal roof.

3. Daylight: Improve indoor lighting during the day by means of skylights and save energy. When installing daylight panels or daylight glass at certain points on the metal roof, the duration of use of the daylight should be aligned with the metal ceiling panel and the connection between the daylight and the metal ceiling panel should be treated watertight.

Seeing this, do you also want to order an Prefab House? If necessary, you can contact Qingdao Xinguangzheng Steel Structure Co., Ltd. they will provide the Prefab House of the best quality.

Introduction of Product:

Steel structure building has a history of several decades in Europe and the United States. It develops rapidly with the

 advantages of good seismic resistance, environmental protection and rapid installation. After more than 20 years of 

steady development, xinguangzheng steel structure has continuously improved the "turnkey" ability of steel structure

 product project from design, construction to decoration completion, providing systematic solutions for enterprises. 

Take xinguangzheng apartment building as an example to show the new face of industrial enterprise apartment building.

Xinguangzheng steel structure apartment building

Project structure system:Steel structure light steel structure

Project area:270 square meters

Project size：20*13.5*16m

Project detail: The whole apartment building has 5 floors, from the foundation to the external wall insulation, including water and

 electricity system and decoration, are all completed by xinguangzheng steel structure, and equipped with independent 

energy-saving central air conditioning.

One is the staff dining room, the other is cement foam board for maintenance. The two - five story is the employee dormitory, the

 two outer wall maintenance material is the cement foam board, and the three to five layers of external wall maintenance material 

is composite board. There are 4 suites on each floor. The bathroom and toilet of each room are independent rooms. The specific 

configuration is 2 rooms, 1 kitchen, 1 hall,1 bath and 1 toilet.

Prefab House refers to a building where parts and components produced in a factory are assembled and connected at the construction site. Steel structure prefabricated buildings refer to steel structure components produced in factories and assembled and connected at the construction site.

What is Prefab House?

Different countries have different understandings and practices of the housing system, but Prefab House generally refers to the main project of the house. Different residential products are formed due to the selection of different structural materials, structural types and construction methods, and constitute a number of corresponding residential products ranging from design to The complete technology of construction. The steel structure residential building system uses the steel structure form as the basis for the classification of the building system and becomes a branch of the building system.

Why choose Prefab House?

The material of Prefab House has good homogeneity and isotropy, which is an ideal elastic body, which is most in line with the basic assumptions of general engineering mechanics; the material has good plasticity and toughness, can have large deformations, and can well withstand dynamic loads; construction period is short ; It has a high degree of industrialization and can be used for specialized production with a high degree of mechanization; it has high processing accuracy, high efficiency, and good airtightness, so it can be used to build gas tanks, oil tanks, and transformers.

In the future, the steel structure of Prefab House should study high-strength steel to greatly increase its yield point strength; in addition, new types of steel should be rolled, such as H-shaped steel (also known as wide flange steel), T-shaped steel and profiled steel plates, etc. The needs of large-span structures and super high-rise buildings.

What are the characteristics of Prefab House?

(1) Light weight and high strength. Due to the use of steel as the load-bearing structure and new building materials as the enclosure structure, Prefab House generally uses steel structure to build residences that weigh about one-half of the weight of reinforced concrete residences, which reduces the weight of the house and reduces the cost of basic engineering. Since the building area occupied by the vertical force-bearing member is relatively small, the use area of the house can be increased. At the same time, because the steel structure residence adopts a large bay and large depth column network, it provides residents with a large space that can be flexibly separated, which can meet the different needs of users.

(2) The degree of industrialization is high and meets the requirements of industrialization. Most of the structural components of Prefab House are made in factories, which are easy to install and suitable for mass production. This has changed the traditional way of housing construction and realized the transformation from "building houses" to "manufacturing houses". Promoted the transformation of the housing industry from extensive to intensive, and at the same time promoted the development of productivity.

Qingdao Xinguangzheng Steel Structure Co., Ltd. has worked on the production of Prefab Houses for several years. You can find the best Prefab House in this company.

Industrial steel building mainly refers to that the main load-bearing components are composed of steel. Including steel column, steel beam, steel structure foundation, steel roof truss (of course, the span of the plant is relatively large, and they are basically steel structure roof truss now), steel roof. Note that the wall of steel structure can also be maintained by brick wall.

What should be taken into account in the day-to-day maintenance of industrial steel buildings?

What are the arrangements for the planning of industrial steel buildings?

What should be taken into account when selecting industrial steel building?

What should be taken into account in the day-to-day maintenance of industrial steel buildings?

After the installation of our industrial steel building, the owner is not allowed to change its structure privately, not to remove screws and other parts, and not to increase or reduce the partition wall. If you need to change a part, you need to negotiate with the manufacturer. It is up to the manufacturer to decide whether it can be changed. After approximately three years of use, the steel structure must be maintained with colour to give the building beauty and safety. industrial steel buildings are connected by steel construction components, so electrical devices such as wires should be insulated by cable channels in order to avoid accidents involving electric shocks.

The maintenance of industrial steel buildings is closely linked to the durability of the steel structure. That is why the industry pays enough attention to it. If you have problems with maintenance and maintenance, you should contact a professional steel construction manufacturer for help.

What are the arrangements for the planning of industrial steel buildings?

1. Insurance: Avoid rain water from the outside entering the metal roof of the industrial steel building. Rainwater enters the metal roof mainly through overlapping joints or knots. In order to achieve the function of the centrifuge, it is necessary to use a sealing disc at the screw connection and to make a concealed fixation. Use sealants or welds on the top of the plate. Best use a long board to remove the overlap. Close water-tight treatment for bleeding.

2. Fire protection: The metal material does not burn in the event of fire and the flame does not penetrate the metal roof plate.

3. Wind pressure resistance: industrial steel building can withstand the maximum local wind pressure and the metal roof plate is not removed by negative wind pressure. The wind resistance depends on the strength of the metal roof plate and the fixing seat and the density of the fixing seat.

What should be taken into account when selecting industrial steel building?

Sound protection: industrial steel building prevents sound transmission from the outside to the inside or from the inside to the outside. Fill the metal sheet with sound insulation material (mostly insulated cotton) and the sound insulation effect is expressed by the sound intensity difference on both sides of the metal sheet. The sound insulation effect depends on the density and thickness of the sound insulating agent. Note that sound insulating agents have different locking effects on sounds of different frequencies.

After reading these words, do you also want to order an industrial steel building? If necessary, you can contact Qingdao Xinguangzheng Steel Structure Co., Ltd., which is an advanced industrial steel manufacturer.

Steel building accessories are constructed of steel materials. It is one of the main types of building structures. The structure consists mainly of steel bearings, steel columns, steel joints and other components made of profile steel and steel plates and uses rust removal and rust protection methods such as silylation, pure manganese phosphation, water washing and drying, galvanizing and so on.

How to use Steel building accessories?

Prefabricate and assemble steel building accessories on the steel platform according to the installation sequence and process requirements to ensure the welding quality.

The spacing between the splicing joint of flange plate and web plate of section steel shall be greater than 200mm. The splicing length of flange plate shall not be less than 2 times of plate width; The web splicing width shall not be less than 300 mm and the length shall not be less than 600 mm.

In order to facilitate welding and ensure welding quality, the stiffener plates, connecting plates, base plates and cantilever beams (beams) on columns and beams shall be assembled and welded on the ground steel platform according to the dimensions of the construction drawing.

The Steel building accessories prefabricated on the steel platform shall not only be fabricated and assembled according to the construction drawings and specifications, but also consider the process of on-site installation and the change of installation size.

Why does steel building accessories need post-maintenance?

Some Steel building accessories users do not know that steel structures still need to be maintained and maintained. As a result, there is serious corrosion that users often can't find out, which makes steel products appear many unsafe hidden dangers, reduces the safety of Steel building accessories in use, and even affects normal use functions. It is recommended that the design unit not only put forward the painting requirements of the steel structure in the painting design description of the steel structure, but also put forward the maintenance and maintenance requirements of the Steel building accessories according to its use.

How to prevent steel building accessories from rusting?

There are many ways to prevent steel building accessories from rusting, and the following are usually used:

• The steel structure is made of alloy steel that is not easy to rust

• Chemical oxide layer protection method

• Using metal coating protection method

• Non-metallic coating protection law

In the later maintenance and maintenance process, non-metallic coating protection method is especially commonly used. The surface of the component is protected by paint and plastic, so that it does not contact the surrounding corrosive medium, so as to achieve the purpose of anti-corrosion. This method has good effect, low price, and has a wide range of paint varieties, a wide range of options, and strong applicability. It is not limited by the shape and size of the component. It can form a film with any shape on the surface of the component. The adhesion is firm. It can also follow the temperature change. The components are telescopic and easy to use. It is also possible to give the component a beautiful color.

Great products begin with the best engineering staff, and Qingdao Xinguangzheng Steel Structure Co., Ltd. is ready to assist you with your technical requirements for steel building accessories.

Qingdao Xinguangzheng Steel Structure Group completed Qingdao Haier Yungu Supporting School Project on August 31, 2022.

Generally speaking, the installation procedures of industrial steel building include installation of steel columns, installation of inter-column supports, temporary installation of steel crane beams, roof beams, roof supports, steel crane beams, etc., correction, fixation, and structural installation of maintenance.

• What is the specific process of industrial steel building construction?

• How to regularly maintain industrial steel building?

• How to consider the cost of industrial steel building construction?

What is the specific process of industrial steel buildings?

1. Lifting the main structure of industrial steel buildings: connecting steel carriers on the ground, erecting steel columns, lifting steel carriers, connecting secondary structures, correcting the deviation of the main structure, installing crane carriers (optional), lifting intermediate layers (optional), and coating with fire resistant paint pack.

Main control quality: The deviation of the main structure should meet the specifications and design requirements and the initial and final application of high-strength screws should meet the requirements.

2. Installation of secondary structure: roofing posts, roof wall supports, flange supports, etc.

3. Laying of roof plate and insulation layer: first lay insulation layer, then assemble roof plate (in some projects a position of steel fabric is also placed under the insulation layer to prevent a fall of the insulation layer, this mainly depends on insulation layer level)

Main quality control: The roof is mainly waterproof, therefore the plate should be covered with the plate, the nail position, the glue coating should be full or not, the glue should be wiped clean and the coating on the surface of the plate should not be damaged to rust etc. to avoid.

How to regularly maintain industrial steel building?

industrial steel building wall maintenance and installation: mainly the installation of wall insulation and wall panels.

The main quality control of industrial steel building: the wall is mainly an aesthetic problem, and a window area is waterproof. There is also the problem of installation deviation. For example, the bottom should be flat, the entire plane should be flat, the flatness deviation between the board and the board should meet the requirements, and so on.

The detailed structure of the industrial steel building: mainly the installation of some trims, such as the wrap angle between the roof and the wall, the wrap angle at the corner of the wall, the flooding board between the wall panel and the brick wall, the door and window trim, etc.

How to consider the cost of industrial steel building construction?

The price of industrial steel building can only be compared with certain basic conditions, such as whether it is imported or domestic color panels, its thickness, coating; insulation material and thickness; whether there is a skylight; workshop bays and spans; whether there are cranes, crane tonnage, Many factors such as the level of the work system are related, and the impact of the price difference in other regions and the qualification level of the construction unit cannot be ignored.

The industrial steel building has achieved an irreplaceable position in industrial production. Qingdao Xinguangzheng Steel Structure Co., Ltd. is committed to providing different kinds industrial steel buildings of high quality for all customers from all over the world.

Pan and Jar SIG-19 Poultry Drinker, 4 Litre South Indian Poultry Equipments TrustSEAL Verified Ernakulam Call Now Get Best Price SIG-20 Poultry Feeder South Indian Poultry Equipments TrustSEAL Verified Ernakulam Call Now Get Best Price 14,153 Views 5,179 Enquiries Chicken Feathering Machine, 5 Birds A S Engineers TrustSEAL Verified

Contact Us To All India Metal Corporation Head Office : 507 / 508, 5th Floor, Parekh Market, 39 J.S.S. Road,Opera House, Mumbai – 400004. Phone: 91-22-4970 0739 | Email:info@allindiametal About Us Products Advanced Materials 3D Printing Powders ...

At Alan’s Factory Outlet, we support the local farming community by sell agricultural structures that offer effective storage solutions at affordable prices. Our steel agricultural buildings provide dependable shelter for your equipment, vehicles, and other ag. …

Ag-1 Ag-2 Ag-3 Ag-4 Ag-5 Ag-6 Ag-7 Ag-8 Ag-9 Ag-10 Ag-11 Ag-12 Ag-13 Ag-14 Ag-15 Ag-16 Get your Quick Quote Agricultural Steel Building needs vary across the industry. While the rancher may need an area for tack and horse, the grain farmer may need cover for combines and tractors. Maybe the need is for a dairy barn or a horse riding arena.

27/4/2022· Get in touch with us now. , Apr 27, 2022. The total volume of alloy steel and stainless steel imported by India at the end of the year 2021 accounted for around 1.9 million metric tons. This ...

China Steel Structure Poultry Farm Building catalog of Industrial Steel Structure Commercial Prefabricated Chicken House for Sale, Industrial Commercial Prefabricated/Prefab Chicken House for Sale provided by China manufacturer - Qingdao Director Steel

Agricultural Steel-Framed Buildings At JSL Construction we've been making steel-framed buildings for over 50 years. Our experience and expertise in this field mean we are a trusted supplier of agricultural buildings in North Yorkshire and beyond. We also manufacture top quality industrial, equestrian and commercial buildings.

Looking forward, the publisher expects the Indian warehouse market to grow at a CAGR of 9.10% during 2021-2026. Several factors like the country’s changing tax regime, growth across major industries such as automobiles, food, agriculture, pharmaceuticals, FMCG and the emergence of organized retail have supported the growth of the warehousing ...