Galvanized Steel supplier- Manufacturers Suppliers Factory From China

Introduction of Ethiopian Prefabricated steel structural water bottling processing workshop

Located: Ethiopia

Construction area: 2000㎡

Cladding: 0.5mm galvanized sheet (No insolution)

XGZ provide design,fabrication and installation guidance as client's required.

Project picture of Ethiopian Prefabricated steel structural water bottling processing workshop

Company information of Ethiopian Prefabricated steel structural water bottling processing workshop

 A brief introduction to you about our company first, then you can contact me if there is suitable project in the future.

1200 workers, 360000 ㎡ non-dust workshop, 25 years experience, CE, ISO9001, ISO9712, ISO3834, BV, SGS certificated, one 

hour reach Qingdao port, our company, as a manufacture, this is how we keep good quality and competitive prices for global

 valued customers.

We provide steel building design, farm house design, manufacture and installation service.

Prefab House is a house constructed by industrialized production methods. It is a house constructed by prefabricating part or all of the components of the house in the factory and then transporting it to the construction site. The components are assembled through reliable connections.

• What are the characteristics of Prefab House?

• What are the actual advantages of Prefab House?

• What is the significance of the appearance of Steel Structure Prefab House?

What are the characteristics of the Prefab House?

1. Prefab House is estimated to be about 30% faster than conventional construction methods.

2. The safety of the Prefab House is perfectly fine, since the finished steps, external walls etc. are transported to the construction site but also have to be covered instead of easy connection with steel concrete. Steel rods run through each floor, and the structure of the house is very strong.

3. Compared to traditional built houses, Prefab House has a higher component precision that can minimise frequent quality problems such as wall friction and leakage and can improve the general level of safety, fire resistance and durability of the house. It uses a light partition system and the owner can change the decoration as needed.

4. Prefab House is more energy-saving and environmentally friendly when used in the home, e.g. a new type of thermal insulation layer that has a better thermal insulation effect. When a household measurement is implemented and the heating has the same temperature, the room temperature of the "assembled" space is higher. The head of household may consider lowering the heating temperature, saving heating costs and, at the same time, reducing energy consumption.

What are the actual advantages of Prefab House?

1. The space layout of Prefab House is flexible.

2. The construction process of Prefab House is environmentally friendly and sustainable.

3. The structure of Prefab House has light weight and high bearing capacity.

4. Prefab House has excellent quality and superior seismic performance.

5. Prefab House can realize the industrialization and industrialization of residential construction, and the construction period is short.

6. Prefab House is very economical and applicable.

What is the significance of the appearance of Steel Structure Prefab House?

For a long time, the construction of houses is dominated by concrete structures. Concrete structure houses mainly use on-site manual wet work. There are problems such as low production efficiency, long construction period, high energy consumption, serious pollution, difficult to guarantee quality and performance, and short life cycle. Around the 1990s, the development of steel structures began. The appearance of Steel Structure Prefab House is a major contribution to our human habitation, reducing the pressure on the living environment. Over the years, housing construction data show that the amount of construction waste has accounted for nearly 40% of the total urban waste.

Qingdao Xinguangzheng Steel Structure Co., Ltd., which has been established for over ten years, focuses on the production of Prefab Houses. Here, you can find the Prefab Houses you need.

Prefab House only prefabricates some parts, and it must be poured in the same way as traditional buildings on the construction site. It is not "building blocks" as imagined. Therefore, no difference can be seen from the appearance of the house after it is built. Here we are going to introduce the Prefab House.

• What are the reasons why people choose Prefab House?

• What are the advantages of steel structure prefabricated houses?

• What are the advantages of Prefab House for building plant?

What are the reasons why people choose Prefab House?

1. Prefab House is of great benefit to energy conservation and environmental protection. Through factory production and on-site assembly construction, it can greatly reduce construction waste and construction sewage, reduce construction noise, reduce harmful gas and dust emissions, and reduce on-site construction and management personnel. Generally, it can save 20% of materials and about 60% of water.

2. The housing industrialization of Prefab House is not only beneficial to the capital flow of development enterprises, but can also increase the speed of housing listing, so it can greatly alleviate the current situation of insufficient market supply and adjust the supply relationship. After large-scale promotion, construction costs can be reduced, and it will also play a role in restraining housing prices.

3. Comprehensive cost accounting shows that the construction cost of Prefab House is higher than that of traditional construction methods, but after large-scale promotion, construction costs can be reduced.

What are the advantages of steel structure prefabricated houses?

First, the components of prefabricated houses can be industrialized in factories. The components are equivalent to standard products and can be installed directly after being transported to the site. It can be said to be convenient and fast. The construction field during the construction period, especially the unparalleled advantages.

prefabricated houses with steel structure are more stable than those made of welded frame steel. In addition, it is cheaper and more economical. Long service life, 50-70 years. Locked with bolts, it can be used repeatedly without any maintenance.

What are the advantages of Prefab House for building plant?

1. Large span: such Prefab House can realize single span or multi span, and the maximum span without center column is 36m.

2. Low cost: according to the requirements of customers, the unit price of Prefab House ranges from $150 / m2 to $300 / m2.

3. Convenient installation and short construction time: save manpower and cost for customers.

4. Prefab House has a long service life: up to 50 years

5. Environmental protection: such buildings are free of harmful substances.

6. Structural stability: earthquake resistance, wind resistance and snow resistance.

7. Others such as waterproof, heat insulation and energy saving.

The Prefab House produced by Qingdao Xinguangzheng Steel Structure Co., Ltd. has been exported to several countries. And there are several offices in the country, which is convenient for domestic customers to maintain. Based on technological innovation, their company constantly improves product quality and provides you with professional Prefab House.

Steel building accessories has the advantages of overall light weight, saving foundation, less materials, low cost, short construction period, large span, safety and reliability, beautiful appearance and stable structure. Steel structure workshop is widely used in construction industries such as long-span industrial workshop, warehouse, cold storage, high-rise building, office building, multi-storey parking lot and residential house.

• How to use the machine to remove the rust spots on the surface of Steel building accessories?

• What are the main Steel building accessories?

• How to remove the rust spots on the surface of Steel building accessories?

For Steel building accessories that have been used for a period of time, there are inevitably some attachments on the surface, such as rust, dirt, dust, old paint film, etc. Before painting the surface of Steel building accessories, if these attachments are not completely removed, although they can be temporarily covered after painting, they play a role of isolation, which makes the coating and the component substrate bond If the strength is severely reduced, the paint film will fall off prematurely, which will eventually reduce the corrosion resistance of the surface coating and fail to play the protective role of the coating. Therefore, before painting the surface of the component, the attachments on the surface of Steel building accessories should be thoroughly cleaned.

How to use the machine to remove the rust spots on the surface of Steel building accessories?

In order to improve the quality of rust removal and work efficiency. To improve the working conditions of construction workers, the current Steel building accessories derusting work has adopted a large number of wind-driven or electric small equipment. The main rust removal methods using equipment are:

(1) Angle grinder: This small pneumatic equipment is mainly used to clean flat areas. It can use sandpaper, grinding wheels and wire brushes as needed.

(2) Needle Bundle Derusting Machine: This kind of small pneumatic equipment is generally equipped with 30-40 needle bundles, which can be adjusted with different working surfaces, which are mainly suitable for curved, narrow, uneven and cracked places.

(3) Single-head cold air gun: This small pneumatic equipment is also called zinc knocking. It uses the impact of the knocking head to remove rust. The diameter of the shovel head is generally 25-40mm, and it can impact 1000 to 6000 times per minute. Suitable for relatively narrow places.

What are the main Steel building accessories?

1. Two-hole connection accessories

One of the main accessories of Steel building accessories is the double-hole connection accessory, which is mainly used to connect with the corners. The corners on both sides of the right-angle connection can reduce the pressure on the alloy. At the same time, the recesses of the building materials can be based on the aluminum alloy frame.

2. Single hole connector

Steel building accessories also has an important accessory, the single-hole connector, which has a completely different function from the double-pipe connector. It is mainly used for the affinity connection between the aluminum alloy frame and the ground in the ground installation. Therefore, the single-hole connector has The role of anchor bolts.

The Steel building accessories have been widely used in daily life and industrial production. Qingdao Xinguangzheng Steel Structure Co., Ltd. can provide the best Steel building accessories for their customers.

Industrial steel building mainly refers to that the main load-bearing components are composed of steel. Including steel column, steel beam, steel structure foundation, steel roof truss (of course, the span of the plant is relatively large, and they are basically steel structure roof truss now), steel roof. Note that the wall of steel structure can also be maintained by brick wall.

What should be taken into account in the day-to-day maintenance of industrial steel buildings?

What are the arrangements for the planning of industrial steel buildings?

What should be taken into account when selecting industrial steel building?

What should be taken into account in the day-to-day maintenance of industrial steel buildings?

After the installation of our industrial steel building, the owner is not allowed to change its structure privately, not to remove screws and other parts, and not to increase or reduce the partition wall. If you need to change a part, you need to negotiate with the manufacturer. It is up to the manufacturer to decide whether it can be changed. After approximately three years of use, the steel structure must be maintained with colour to give the building beauty and safety. industrial steel buildings are connected by steel construction components, so electrical devices such as wires should be insulated by cable channels in order to avoid accidents involving electric shocks.

The maintenance of industrial steel buildings is closely linked to the durability of the steel structure. That is why the industry pays enough attention to it. If you have problems with maintenance and maintenance, you should contact a professional steel construction manufacturer for help.

What are the arrangements for the planning of industrial steel buildings?

1. Insurance: Avoid rain water from the outside entering the metal roof of the industrial steel building. Rainwater enters the metal roof mainly through overlapping joints or knots. In order to achieve the function of the centrifuge, it is necessary to use a sealing disc at the screw connection and to make a concealed fixation. Use sealants or welds on the top of the plate. Best use a long board to remove the overlap. Close water-tight treatment for bleeding.

2. Fire protection: The metal material does not burn in the event of fire and the flame does not penetrate the metal roof plate.

3. Wind pressure resistance: industrial steel building can withstand the maximum local wind pressure and the metal roof plate is not removed by negative wind pressure. The wind resistance depends on the strength of the metal roof plate and the fixing seat and the density of the fixing seat.

What should be taken into account when selecting industrial steel building?

Sound protection: industrial steel building prevents sound transmission from the outside to the inside or from the inside to the outside. Fill the metal sheet with sound insulation material (mostly insulated cotton) and the sound insulation effect is expressed by the sound intensity difference on both sides of the metal sheet. The sound insulation effect depends on the density and thickness of the sound insulating agent. Note that sound insulating agents have different locking effects on sounds of different frequencies.

After reading these words, do you also want to order an industrial steel building? If necessary, you can contact Qingdao Xinguangzheng Steel Structure Co., Ltd., which is an advanced industrial steel manufacturer.

Agricultural steel building has low cost, short construction time, and less pollution. Therefore, it has become the best choice for new-style construction.

What are the relevant parameters of agricultural steel building?

Structural parts: material, surface roughness, tolerance, surface treatment, straightness (or radian)

Connection: hole position deviation, bolt grade; welding method, welding standard, welding material; air tightness, non-destructive testing, liquid penetration testing, etc. are required

Overall structure: verticality, horizontality, etc.

Packaging: packaging materials, packaging methods

Storage: ambient temperature, ambient humidity

Transportation: loading and unloading, placing in vehicles, placing in containers, etc.

What technologies are used in agricultural steel building?

Fire protection technology. One of the most critical issues in agricultural steel building is the application of fire protection technology. The fire resistance rating of light steel structure houses is level 4. For light steel structure residential buildings, fire-resistant gypsum boards are pasted on both sides of the wall and the ceiling of the floor. For ordinary firewalls and household walls, 25.4 mm thick (1 inch) gypsum boards are used to protect them to meet the 1-hour fire protection requirement. The glass fiber filled between the wall columns and the floor joists also plays an active role in protecting fire and heat transfer.

Sound insulation technology. The agricultural steel building is filled with glass wool between the inner and outer walls and the floor joists, which effectively prevents the audio part transmitted through the air. For the impact sound transmitted through the solid, the following construction is performed: the partition wall is composed of two wall columns. There are two walls with intermediate spaces; for the small keel used to fix the gypsum board for the suspended ceiling, an elastic structure with small cut grooves is used to effectively reduce the transmission of structure-borne sound between floors.

What should be taken into account when using agricultural steel building?

If an agricultural steel building is damaged, we must immediately recognise and remedy the problem. The main factors of steel structural damage are:

(1) the structural viability of agricultural steel buildings is insufficient due to changes in load, overdue service and changes in rules and regulations;

2) The components of agricultural steelworks are deformed, twisted, damaged, deformed, etc., due to various accidents; which results in a weakening of the cross-section of the component, a twisting of the rod and a tearing of the connection;

(3) deformation, cracking and retardation of agricultural steel components or connections due to temperature differences;

4) The agricultural steel structure corrodes due to the erosion of chemical substances and electrochemical corrosion leads to a weakening of the cross-section of the steel structure;

5) Other include errors in design, production, construction and illegal use and operation during the service period.

There are three main technical reinforcement measures for agricultural steel construction:

1) Cross-section defences: Apply the element locally or over the entire length of the element with steel and connect it to a whole to carry the force together;

2) Change the calculation diagram: add additional supports, adjust load distribution, reduce cutting force level, force displacement of static indefinite structural support and reduce peak voltage;

3) Pre-tensioned cable method: use high-strength cables to strengthen the weak links of the structure or to improve the overall durability, stiffness and stability of the structure.

Qingdao Xinguangzheng Steel Structure Co., Ltd. has been developing agricultural steel buildings for many years, and is known as "the national brand leader in the Chinesesteel building industry". Therefore, customers can choose their products with confidence.

Nowadays, more and more industrial parks prefer to build workshop, warehouse, office and other buildings by steel structures. Why are steel structures so popular with the public? It is mainly due to the four excellent functions of steel structure "light, fast, good properties and economical".

1. Light: The steel structure has the characteristics of light weight and excellent stress function.

Steel has the smallest ratio of density to strength compared with concrete and wood. For example, the weight of steel roof trusses is only 30% or even 25% of the same concrete roof truss under the same load and strength conditions. The weight of the steel structure house is about 50% of the reinforced concrete house, but the usable area is about 4% higher than that of the reinforced concrete house.

2. Fast.

The steel structure is prefabricated in the factory then bolts contacted installation on site. It has the characteristics of mass production of large pieces and high-level precision of finished products, which effectively shorten the construction period and reducing the cost to give high investment returen. Compared with the construction period of reinforced concrete structure engineering, the steel structure is only 1/3 to 1/2 of the reinforced concrete structure under the same conditions .

3. Good properties: The steel structure has good properties and high reliability.

Steel has uniform of texture, isotropy, large elastic modulus, good plasticity ,good resistance and is an ideal elastic plastic body. Therefore, the steel structure will not suddenly break due to occasional overloading or partial overloading, it can adapt to the oscillating load, and the calculation model can reflect the mechanical properties of the steel well, so the analysis is accurate and reliable.

4.Economical.

The cost of steel structure is higher than concrete structure from the raw materials only, but the construction speed of steel structure is about 50% faster than concrete structure, which will save a lot of time and cost. The steel structure is more than 50% lighter than the overall weight of the concrete structure house, so that the cost of basic treatment and transportation will be reduced. Building is a systematic project  includes many items, such as planning, manufacturing, transportation, installation, maintenance and management. Therefore, from the overall point of view, the steel structure is more cost saving.

The beam-column joints of Prefab House are mainly connected by bolt welding. However, bolted joints are recommended for fabricated steel structures. The advantage of bolted connection (weld-free connection) is that the installation speed is fast and the construction quality is easier to control.

What is the actual value of Prefab House?

1. The construction period is short. Generally, the first floor of Prefab House can be built in three or four days, and it only takes one or two days. Steel structure residential systems are mostly manufactured in factories and installed on-site. The amount of on-site work is greatly reduced. Therefore, the construction period can be greatly shortened, and the noise and dust generated during the construction, as well as the consumption of on-site resources and various on-site expenses are correspondingly reduced. Compared with reinforced concrete structures, the construction period can generally be shortened by one-half, the investment benefits can be brought into play in advance, capital turnover can be accelerated, and construction costs can be reduced by 3%-5%.

2. Good seismic performance. Because the steel of Prefab House is an elastically deformable material, it can greatly improve the safety and reliability of the house. The steel structure has high strength, good ductility and light weight, which can greatly improve the mechanical performance of the structure, especially the seismic performance. Judging from the situation after the earthquake at home and abroad, the number of collapsed steel structure residential buildings is very small.

What is the importance of the Prefab House?

In line with the development direction of building energy efficiency. Prefab House uses steel as the frame and thermal insulation wallboard as the enclosure structure, which can replace clay bricks, reduce the amount of cement, sand, stone, and lime, and reduce the damage to non-renewable resources. On-site wet construction is reduced, and the construction environment is better. At the same time, steel can be recycled and reused, and the environmental pollution during construction and dismantling is small, and its energy saving index can reach more than 50%, which belongs to the green building system.

The application of steel structure in Prefab House has opened up a new application market for my country's steel industry. It can also drive the research and application of related new building materials.

What are the structural features of Prefab House?

Steel-finished house is generally a residential building constructed with factory-made, economical steel profiles as a supporting work and new lightweight, heat-conserving, heat-insulating and high-strength wall materials as a home. The industrialisation of the steel building house refers to the use of steel construction houses as the final product. Through socialized mass production, the process of investment, development, construction, construction and customer service of steel dwellings is centralised and unified into an overall organisational form. The industrialization of the steel building house is the development trend of the steel building house.

Knowing this, do you also need to order a Prefab House? Qingdao Xinguangzheng Steel Structure Co., Ltd. is committed to providing various Prefab Houses with high quality for all customers from all over the world.

17/11/2022· In addition to servicing various operating businesses, legal services also concentrate in the areas of M

Light Weight Steel structure building Space Frame Structure Warehouse Workshop Roof Truss Portal Steel Structure Breeding Shed ... Contact US Tel: 86-13056227515 008651683610166 Email: safs139@safsteelstructure Dapeng Town Industrial Park ...

Rectangular Hollow Sections. Larger sizes available to special order. *= May be available in 10.1 or 12.0 metre lengths. Hollow Sections may be Cold Rolled or Hot finished, we would normally supply Cold Formed. Size Dia mm. Thickness (T) mm. Mass Kgm/Metre. Length Metre. 50 x 25.

Buy high quality Steel Hangar by Jeyyanthaa Exporters. Supplier from India. Product Id 890540. Help Contact Customer Support Your Feedback Forgot Password go4WorldBusiness Q

India imports most of its Building supply from China, Switzerland and United Arab Emirates and is the largest importer of Building supply in the World. The top 1 importers of Building supply are India with 865 shipments followed by with 0 at the 3rd spot with 0 shipments. Top 3 Product Categories of Building supply Imports in India are

ARTeFAC takes pride in presenting Canadian made furniture that satisfies the tastes and needs of the North American market. Every item is superbly finished, durable and backed with a full warranty. Custom made items include bar counter stools, chairs, tables, and dinette sets.

Get India Steel Works latest Key Financial Ratios, Financial Statements and India Steel Works detailed profit ... Enterprise Value (Cr.) 268.23 153.93 114.05 130.49 195.06 EV/Net Operating Revenue ...

There are three types of poultry houses are 1. Open-side Poultry house 2. Front and Backsides 3.Controlled Environment house 1.OPEN-SIDED POULTRY HOUSE Most of the poultry houses in the world are conventional or open-sided; that is, they rely on the free flow of air through the house for ventilation.