Galvanized Steel market price- Factory Suppliers Manufacturers From China

Prefab House refers to a building where parts and components produced in a factory are assembled and connected at the construction site. Steel structure prefabricated buildings refer to steel structure components produced in factories and assembled and connected at the construction site.

What is Prefab House?

Different countries have different understandings and practices of the housing system, but Prefab House generally refers to the main project of the house. Different residential products are formed due to the selection of different structural materials, structural types and construction methods, and constitute a number of corresponding residential products ranging from design to The complete technology of construction. The steel structure residential building system uses the steel structure form as the basis for the classification of the building system and becomes a branch of the building system.

Why choose Prefab House?

The material of Prefab House has good homogeneity and isotropy, which is an ideal elastic body, which is most in line with the basic assumptions of general engineering mechanics; the material has good plasticity and toughness, can have large deformations, and can well withstand dynamic loads; construction period is short ; It has a high degree of industrialization and can be used for specialized production with a high degree of mechanization; it has high processing accuracy, high efficiency, and good airtightness, so it can be used to build gas tanks, oil tanks, and transformers.

In the future, the steel structure of Prefab House should study high-strength steel to greatly increase its yield point strength; in addition, new types of steel should be rolled, such as H-shaped steel (also known as wide flange steel), T-shaped steel and profiled steel plates, etc. The needs of large-span structures and super high-rise buildings.

What are the characteristics of Prefab House?

(1) Light weight and high strength. Due to the use of steel as the load-bearing structure and new building materials as the enclosure structure, Prefab House generally uses steel structure to build residences that weigh about one-half of the weight of reinforced concrete residences, which reduces the weight of the house and reduces the cost of basic engineering. Since the building area occupied by the vertical force-bearing member is relatively small, the use area of the house can be increased. At the same time, because the steel structure residence adopts a large bay and large depth column network, it provides residents with a large space that can be flexibly separated, which can meet the different needs of users.

(2) The degree of industrialization is high and meets the requirements of industrialization. Most of the structural components of Prefab House are made in factories, which are easy to install and suitable for mass production. This has changed the traditional way of housing construction and realized the transformation from "building houses" to "manufacturing houses". Promoted the transformation of the housing industry from extensive to intensive, and at the same time promoted the development of productivity.

Qingdao Xinguangzheng Steel Structure Co., Ltd. has worked on the production of Prefab Houses for several years. You can find the best Prefab House in this company.

Mexico galvanized prefab steel layer house building with cages Project

 

Project address: Mexico

Area: 120m * 16m * 7m

Detailed parameters: Hot-dipped galvanized steel beam, steel column with zinc thickness 100um. Purlins are 275g/m² zinc which

 life span can reach 15-20 years.The reasonable design of the feeding regulator ensures the regulator move stably, and the birds will not run away and get stuck.

Specification

Project address: Argentina

Area: 5930m2

Time: 2009

Introduction: the project covers a total area of 5930 square meters, with three attached spans in the main workshop and eight two ton cranes. The construction started in October 2009, and the project site is not suitable for canuelas in North Aires, Argentina. It took more than two months to complete, and the project is in good condition at present.

 

We supply designing, manufacturing and installationabout the whole steel structure workshop building project.

 

Detail Information

Roof with a single layer of galvanized steel plate sea blue crown Island, its structure and technical requirements are as follows:

1.V820 type 0.50mm thick galvanized roof panel (sea blue) crown Island

2.75mm thick glass wool with aluminum foil

3.200 * 200 coated steel mesh

4.Q235B C-type steel roof purlin

5.Q345B steel beam 

Wall:

1.YX-840 plate type 0.40mm thick galvanized wall panel white gray crown Island

2.Q235B C steel wall purlins

3.Q345B steel column

Paint coating:

1. Shot blasting, rust level Sa2.5

2. In the gray anti-corrosion primer two, each 30 um

other:

1. Roof panel - sea blue

2. Wall panel - white gray

3. Steel components - medium gray  

Introduction of Ethiopian Prefabricated steel structural water bottling processing workshop

Located: Ethiopia

Construction area: 2000㎡

Cladding: 0.5mm galvanized sheet (No insolution)

XGZ provide design,fabrication and installation guidance as client's required.

Project picture of Ethiopian Prefabricated steel structural water bottling processing workshop

Company information of Ethiopian Prefabricated steel structural water bottling processing workshop

 A brief introduction to you about our company first, then you can contact me if there is suitable project in the future.

1200 workers, 360000 ㎡ non-dust workshop, 25 years experience, CE, ISO9001, ISO9712, ISO3834, BV, SGS certificated, one 

hour reach Qingdao port, our company, as a manufacture, this is how we keep good quality and competitive prices for global

 valued customers.

We provide steel building design, farm house design, manufacture and installation service.

Qingdao Xinguangzheng Steel Structure Group completed Qingdao Haier Yungu Supporting School Project on August 31, 2022.

 

 

What is the purpose of isolation?

The purpose of isolation is to cut off the route of transmission in the infection chain,protect susceptible persons, and ultimately control or eliminate the source of infection.

Therefore, it is an important measure to prevent the spread of infectious diseases.

 

 

From a medical point of view, the goal of "isolation" is to prevent the spread of infection and ultimately eliminate or control the source of infection.

That is to prevent and limit the infectious factors of infected patients directly

or indirectly to susceptible persons,

or to those who may pass on such factors to others, and at the same time, enable infected patients to receive timely treatment under control and return to health as soon as possible.

 

 

 

Why choose container house?

 

In the construction field, it is called an assembled modular container house, also known as a container building or a container house.

It is a single room as a prefabricated unit.

The external wall panels and interior decoration of each unit are shipped to the factory after completion.

A building structure to be installed on site.

 

 

 

Compared with the traditional building structure, the container house has the following advantages:

 

(1) Convenient transportation, installation and movement, flexible combination;

(2) The cost is low and it can be completed quickly;

(3) The house can be recycled, and no construction waste is generated during use;

(4) The interior is completely renovated and can be used immediately.

 

 

 

Admittedly, it is precisely because of the advantages of rapid assembly and baggage check-in that the container house can be delivered to the Huoshenshan (Fire God Mountain) hospital within 10 days.

 

Introduction of Pakistan Prefabricated Steel Structure Construction Cola Workshop:

Project Area: 23408 sqm

Project Usage：Pakistan Cola workshop

Project Location: Lahore, Pakistan

Project weight of steel structures： 760 tons.

Project Detail:

Wall & Roof：0.5mm galvanized steel sheet +50mm glass wool+0.4mm galvanized steel sheet.

Span: Multi-Span 100m and 50m

Total Height: 12m

 

Project picture of Pakistan Prefabricated Steel Structure Construction Cola Workshop :

 

Company information

A brief introduction to you about our company first, then you can contact me if there is suitable project in the future.

1200 workers, 360000 ㎡ non-dust workshop, 25 years experience, CE, ISO9001, ISO9712, ISO3834, BV, SGS certificated, one hour reach Qingdao port, our company, as a manufacture, this is how we keep good quality and competitive prices for global valued customers.

We provide steel building design, farm house design, manufacture and installation service.

Agricultural steel building components or parts are usually connected by welds, bolts or rivets. Because of its light weight and simple construction, it is widely used in various fields of agricultural production. Steel structure is easy to rust. Generally, steel structure needs to be derusted, galvanized or painted, and it needs to be maintained regularly. Here we are going to know more about the Agricultural steel building.

• What are the architectural characteristics of Agricultural steel buildings?

• What are the appearance characteristics of Agricultural steel building?

• What should be paid attention to when constructing Agricultural steel building?

What are the architectural characteristics of Agricultural steel buildings?

1. Industrialization of the production process. The steel structure is only connected by high-strength bolts. It also has the advantages of quick installation and return on investment.

2. Use high-quality materials with high toughness and plasticity. The quality is safe and reliable.

3. It also has the advantages of flexible design and decoration, low cost, and various colors.

What are the appearance characteristics of Agricultural steel building?

The Agricultural steel building has no beams and no purlins, wide space, large spanning capacity, and the span of 6-32 meters can be chosen at will. Low cost, low investment, economical. The design and construction period is short,

The roof construction of Agricultural steel building can be completed in 20 days. Colored galvanized steel sheet, mechanical seam connection, natural waterproof, no leakage.

The Agricultural steel building is beautiful in appearance, sturdy and durable, and requires no maintenance.

The Agricultural steel building is light in weight, the overall structure is scientific and reasonable, and the wind and seismic performance is superior. Wind resistance and snow load, can withstand strong winds of 160km/n per hour, and can withstand a snow load of 148kg.

The shape of Agricultural steel building is beautiful, colorful, novel and full of rhythm. Rich and diverse roof forms give the building a new appearance.

The Agricultural steel building has complete functions, the roof slab and beam are integrated, and it integrates multiple functions such as heat preservation, heat insulation, ventilation, and lighting.

What should be paid attention to when constructing Agricultural steel building?

1 Personnel engaged in high-altitude operations must hold a certificate to work, and earnestly abide by the safety construction regulations, wear flexible clothing, and it is forbidden to wear hard-soled and slippery shoes with nails;

2 Workers of Agricultural steel building wear safety belts;

3 A safety net is set under the working surface of Agricultural steel building;

4 Materials for high-altitude operations should be stacked steadily. They should not be placed on the edge or attached to the opening of the hole. If there is a possibility of falling, they should be withdrawn or fixed in time to prevent falling objects from injuring people.

The Agricultural steel buildings made by Qingdao Xinguangzheng Steel Structure Co., Ltd. feature attractive appearance, excellent performance, easy maintenance, and internationally advanced performance indicators, and are exported to more than 10 countries and regions.

The company got its start as a small scrap metal collection business when its founder, Mr. W. G. Harris, started up the business at the age of 17 in the heart of Toronto. The company was incorporated in 1906 and quickly grew from a family business to a prospering enterprise with a national presence, gaining the respect and trust of its customers.

16/10/2022· Functional Building Supply | 41 followers on . Distributor of commercial door, frame, ... The Albert M. Higley Co. Construction Cleveland, Ohio Lakeland Electric Utilities Lakeland, Fl ...

They also make money from concessions, which help to pay for the overhead expenses. Such as employee salaries, rent, maintenance, and cleaning. Movie theaters originate their income from numerous sources. The most significant being: Ticket sales (and membership income if applicable) Food, drink and merchandising sales

Price Your Building Today 1-800-244-4798 CALL NOW Best Sellers Metal Garages Metal Barns Small Garages Commercial Buildings Metal Kits Customer Reviews Contact Us About Us Building Customization Buying Guide

We produce around 3 million tonnes of steel every year. From this, we manufacture more than 1,450 different specifications of steel that gets rolled into rail, sections, special profiles and...

Steel Exchange India Limited (SEIL) is the flagship company of the Vizag Profiles Group. Established in 1999, SEIL is a leading manufacturer of TMT Rebars under the brand 'SIMHADRI TMT'. The company has the largest private integrated steel plant in the two Telugu States, Andhra Pradesh

Commercial Steel Buildings allow you to custom tailor a building specific to your needs. For many developers, this means a single slope building designed for multiple tenants and conforming to local requirements. Many of these buildings are setup with the front wall open to be built with storefront glass and doors by other contractors.

Steel Building Kits For Every Need - Metal Pro Buildings Address 200-100 Tempo Ave North York, ON M2H 2N8 Office hours Mon-Sat 8:00 – 18:00 Sun – Closed Call us today (800) 997-8163 Home Price a Building Gallery Contact Us 1-800-997-8163 CALL TODAY 1 888 658 0286 GET A PRICE QUOTE First Name * Last Name * Email * Phone Country * State / Province *