Commercial steel building export company- Manufacturers Suppliers Factory From China

Industrial steel building mainly means that the main load-bearing components are composed of steel. Including steel pillars, steel beams, steel structure foundations, steel roof trusses (of course, the span of the factory building is relatively large, and it is basically steel structure roof trusses now), steel roof, note that steel structure walls can also be surrounded by brick walls.

• What are the characteristics of Industrial steel building?

• What are the industrial characteristics of Industrial steel building?

• Why do we have to carry out daily maintenance on Industrial steel buildings?

What are the characteristics of Industrial steel building?

The characteristics of the steel construction workshop are:

1. Industrial steel building is light, high-strength and has a large span width.

2.The construction time of industrial steelworks is short, reducing investment costs accordingly.

3. Industrial steel buildings have poor fire resistance and corrosion resistance and steel structures should not be used in areas with low temperatures.

4. Industrial steel building is easy to move and recycle without contamination.

What are the industrial characteristics of Industrial steel building?

Impact

The roofs of flat buildings are mostly inclined roofs, so that the roof construction essentially uses a triangular roof chair system made of cold-formed steel components. The light steel components form a very strong structure after sealing the building plates and plasterboard plates. "Plate-rib structural system", the industrial steel structure of this structure has a stronger earthquake resistance and resistance to horizontal loads and is suitable for areas with earthquake intensities above 8-degree.

Air resistance

The Industrial steel building has a low weight, a high strength, a good overall stiffness and a strong deformability. The building weighs only a fifth of the brick concrete construction and holds a hurricane of 70 meters per second so that life and property can be effectively protected.

Durability

The housing structure of the Industrial steel building consists entirely of cold-formed thin-walled steel component systems. The steel frame consists of a high-strength, cold-rolled, fire-soaked super-corrosion protection sheet which effectively avoids the influence of steel sheet corrosion during construction and use and increases the durability of light steel components. The durability of the structure can reach 100 years.

Why do we have to carry out daily maintenance on Industrial steel buildings?

Industrial steel buildings must be regularly cleaned and maintained. Under normal circumstances, it must be inspected and maintained once a year. When cleaning the outer wall of the Industrial steel building, you must be careful not to contaminate anything. Do not use steel wire balls, brushes and other abrasive cleaning agents. If you use clean water, you should rinse from top to bottom. The branches, leaves and similar objects on the Industrial steel building should be cleaned in time to avoid unnecessary problems due to the delay. If the surface of the metal plate for industrial steelmaking is damaged, it should be repaired in time to prevent the surface of the metal plate from corroding by sun and rain. If necessary, use all coated high-elastic nanomaterials to protect the metal roof plate, act effectively in thermal insulation and sealing and save energy for room climate.

Seeing this, do you also want to order a Industrial steel building? If necessary, you can contact Qingdao Xinguangzheng Steel Structure Co., Ltd. they will provide the Industrial steel building of the best quality.

Prefab House refers to a building where parts and components produced in a factory are assembled and connected at the construction site. Steel structure prefabricated buildings refer to steel structure components produced in factories and assembled and connected at the construction site.

What is Prefab House?

Different countries have different understandings and practices of the housing system, but Prefab House generally refers to the main project of the house. Different residential products are formed due to the selection of different structural materials, structural types and construction methods, and constitute a number of corresponding residential products ranging from design to The complete technology of construction. The steel structure residential building system uses the steel structure form as the basis for the classification of the building system and becomes a branch of the building system.

Why choose Prefab House?

The material of Prefab House has good homogeneity and isotropy, which is an ideal elastic body, which is most in line with the basic assumptions of general engineering mechanics; the material has good plasticity and toughness, can have large deformations, and can well withstand dynamic loads; construction period is short ; It has a high degree of industrialization and can be used for specialized production with a high degree of mechanization; it has high processing accuracy, high efficiency, and good airtightness, so it can be used to build gas tanks, oil tanks, and transformers.

In the future, the steel structure of Prefab House should study high-strength steel to greatly increase its yield point strength; in addition, new types of steel should be rolled, such as H-shaped steel (also known as wide flange steel), T-shaped steel and profiled steel plates, etc. The needs of large-span structures and super high-rise buildings.

What are the characteristics of Prefab House?

(1) Light weight and high strength. Due to the use of steel as the load-bearing structure and new building materials as the enclosure structure, Prefab House generally uses steel structure to build residences that weigh about one-half of the weight of reinforced concrete residences, which reduces the weight of the house and reduces the cost of basic engineering. Since the building area occupied by the vertical force-bearing member is relatively small, the use area of the house can be increased. At the same time, because the steel structure residence adopts a large bay and large depth column network, it provides residents with a large space that can be flexibly separated, which can meet the different needs of users.

(2) The degree of industrialization is high and meets the requirements of industrialization. Most of the structural components of Prefab House are made in factories, which are easy to install and suitable for mass production. This has changed the traditional way of housing construction and realized the transformation from "building houses" to "manufacturing houses". Promoted the transformation of the housing industry from extensive to intensive, and at the same time promoted the development of productivity.

Qingdao Xinguangzheng Steel Structure Co., Ltd. has worked on the production of Prefab Houses for several years. You can find the best Prefab House in this company.

As the strategic decision to develop energy-saving and land-saving housing and construct a conservation-oriented society is further deepened and housing industrialization has become a new growth point for the world’s economic development, the development of residential steel building will be the only way for housing industrialization.

What are the advantages of residential steel building?

1. residential steel building's structural system is diversified

Many structural systems that can be used for steel structure residences have been developed, steel frame structure, steel frame-support structure, frame-tube structure (steel frame, concrete internal simplified), frame-shear wall structure (shear wall can be steel plate, concrete Or concrete with built-in steel support), light steel structure and staggered truss structure system can all be used as the structural selection of residential steel building.

2. The project cost of residential steel building is slightly higher than that of concrete or equivalent

The cost of steel structure material is higher than that of concrete, but its construction period is short, the use area is large, and the number of floors can be increased under the same conditions. The project cost of residential steel building is slightly higher or equivalent to concrete, and the actual economic benefits are significant, making residential steel building It has become the first choice for high quality and low price, and the best choice for replacing masonry structure houses in the future.

What is the future development trend of residential steel building?

residential steel building has a high technological content. The structure itself is often the architectural expression. The performance and craftsmanship of the steel structure is not only a necessary means to realize the image conception, but also has a significant impact on the architectural image, which determines that the structural conception is the success of the image conception. The key is whether or not. The progress of science and technology and the change of aesthetics will inevitably make steel structure buildings continue to expand their expression vocabulary and seek development. residential steel building sets aside the elements of style, starts from structural rationalism, and absorbs the essence from modern and traditional styles. In the future, it will be possible to create high-quality steel structure buildings with organic integration of technology and art.

What are the design considerations of residential steel building?

The residential steel building of the design structure and the stability calculation of components must cooperate with each other to make them consistent. The consistency between structural calculation and structural design has always been a problem that everyone pays attention to in structural design. For the joint connection requiring to transfer bending moment and not, sufficient stiffness and flexibility shall be given to it respectively, and the eccentricity of members shall be minimized for frame joints, which are often considered by designers when dealing with structural details. However, when it comes to stability, there are often structural requirements or special considerations different from strength. For example, in terms of flexural strength of simply supported beams, the requirement for fixed hinge support is only to prevent displacement and allow rotation in the plane. However, the above requirements are not enough when dealing with the overall stability of the beam. The support shall also be able to prevent the beam from twisting around the longitudinal axis, and allow the beam to rotate in the horizontal plane and the beam end section to warp freely, so as to meet the boundary conditions adopted for stability analysis.

Qingdao Xinguangzheng Steel Structure Co., Ltd. has been committed to providing customers with residential steel buildings and perfect after-sales service so that customers can invest easily, use them with confidence, and have no worries.

The components or parts are usually connected by welds, bolts or rivets. Because of its light weight and simple construction, it is widely used in large factories, venues, super high-rise buildings and other fields. The steel structure is easy to rust. Generally, the Steel building accessories shall be derusted, galvanized or coated, and shall be maintained regularly.

What should I pay attention to in daily use of Steel building accessories?

For maintenance personnel, the daily maintenance of Steel building accessories should first be the maintenance of the surface coating of the components. The maintenance of the coating directly affects the service life of the steel structure. Therefore, to do a good job in daily maintenance, you should start with the following points:

1. The surface of the steel structure must be kept clean and dry, and the places where the steel structure is easy to accumulate dust (such as the steel column foot and the gusset plate) should be cleaned regularly.

2. Regularly check the integrity of the protective coating of Steel building accessories. If one of the following occurs, it should be maintained in time:

1) It is found that the area of the coating surface loses its luster to 90%;

2) The area of roughness, weathering and dry cracking of the coating surface reaches 25%;

3) The paint film bulges in the coating and the slightly rusted area of the components reaches 40%;

3. The steel structure parts affected by high temperature and high temperature should be equipped with protective plates to protect the coating from high temperature damage.

4. Try to avoid contact of Steel building accessories with corrosive substances, and clean up those that have been in contact.

What should be prepared before the construction of Steel building accessories?

1. According to the principles of production applicability, reliable performance, safe use, and convenient operation, a variety of Steel building accessories should be selected reasonably.

2. The inspection and measurement equipment should ensure the unity, accuracy and reliability of the value transmission. Various measuring tools such as steel tape, board, square, level, spring force gauge and so on used in the construction shall be verified before storage to ensure that the measuring instruments entering the construction site are qualified. The tools used in the construction shall be checked regularly . Ensure that each tool always meets the measurement accuracy requirements in the same project.

What should I pay attention to when using Steel building accessories?

Steel building accessories must weld the cracks between the two drill holes. During welding, the edges of the cracks can be gas-cut into different types of grooves according to the thickness of the component to ensure the quality of the welding. When the thickness is less than 6mm, use 1 shape (that is, without beveling); when the thickness is greater than 6mm and less than 14mm, use the V-shaped bevel; when the thickness is greater than 14mm, you need to use the X-shaped bevel.

As technology advances, Steel building accessories are increasingly used in everyday life. Qingdao Xinguangzheng Steel Structure Co., Ltd. is known for high precision Steel building accessories. And you can connect them.

Project Area: 25000 sqm

Project Detail:

Xinguangzheng Prefabricated Steel Sports Stadium is single span maximum fish belly type box beam, the maximum span is 50 meters.

The maximum weights of a single piece is 109.5 tons

The web height of the maximum box member is 3.6 meters and the wing width is 0.9 meter.

The maximum thickness of the wing plate is 70m.

Project Spotlight:

The overall performance is a horn shape with great tension, and the architecturat form is landsccape architecture.

The roof of the building is full of greening, integrating the building with the park

The building is equipped with children's natatorium, basketball court, gym, study, culturalcenter and so on.

Project Introduction:

Solomon office project is a two-story frame structure, with a building area of more than 1500 square meters. The first floor is maintained as aluminum-plastic plate curtain wall and part of glass curtain wall, the second floor is maintained as glass curtain wall, the roof is glass wool composite plate, and the parapet part is aluminum-plastic plate.

 

Personnel involved in design and construction refinement: Liu Kangning, Jing Yanyan

Total project amount: 2.94 million

 

Detailed address: Honiara, Solomon Islands

The following project related parameters:

Area: 1500 square meters

Eave height: 7M

Ridge height: 8M

Number of floors: two

Wind speed: 176km / h

Load: second floor load: 450kg / m2, roof: 30kg / m2

Shapes: Framing

Steel consumption: 90 tons

Purpose: Salomon Telekom office and warehouse

 

 

Detail of Prefabricated Steel Structure Building Office in Solomon

 

Main Characters of prefab steel warehouse

· Super Aseismatic

Most part of the structure will be consisted of cold formed steel members, this system aseismatic grade can reachto 8.

· Wind Resistance

Steel structure building has the performance of high strength, solid rigidity and good deformation capacity, can resist strong wind for 50m/s.

·Durable

The steel material will be painted or galvanized as customers' requirement to be more anticorrosion and rustproof, the lifespan of the structure can be reach to 50~70 years.

·Heat Insulation

Sandwich panel can improve the insulation performance of the building, effectively avoid the phenomenon of "cold bridge" wall

·Environment Protection

Little waste for pollution in construction, 100% steel structure materials can be recycled, most of other related materials also can be recycled.

·Easy and Fast Build

Dry construction, will not influenced by the weather and environment, save much time and labor cost. One 300m2 steel structure building, can be finished in 30 days by only 5 workers.

Introduction of Algerian layer house building with equipment

Project equipment system：4 rows of 5-layer cage nets

Project building feeding quantity：34800 layers

Project detail: On the basis of the customer's civil chicken house, Xinguang is transformed into a modern chicken house. In terms of animal husbandry equipment and plant, the company has a professional technical research and development team, each kind of equipment designed is more suitable for animal needs, so that animals can enjoy five-star treatment. The mode of "intelligent + intelligent equipment" that we have constructed makes farming easy and simple.

Steel building accessories are constructed of steel materials. It is one of the main types of building structures. The structure consists mainly of steel bearings, steel columns, steel joints and other components made of profile steel and steel plates and uses rust removal and rust protection methods such as silylation, pure manganese phosphation, water washing and drying, galvanizing and so on.

How to use Steel building accessories?

Prefabricate and assemble Steel building accessories on the steel platform according to the installation sequence and process requirements to ensure the welding quality.

The spacing between the splicing joint of flange plate and web plate of section steel shall be greater than 200mm. The splicing length of flange plate shall not be less than 2 times of plate width; The web splicing width shall not be less than 300 mm and the length shall not be less than 600 mm.

In order to facilitate welding and ensure welding quality, the stiffener plates, connecting plates, base plates and cantilever beams (beams) on columns and beams shall be assembled and welded on the ground steel platform according to the dimensions of the construction drawing.

The Steel building accessories prefabricated on the steel platform shall not only be fabricated and assembled according to the construction drawings and specifications, but also consider the process of on-site installation and the change of installation size.

Why does Steel building accessories need post-maintenance?

Some Steel building accessories users do not know that steel structures still need to be maintained and maintained. As a result, there is serious corrosion that users often can't find out, which makes steel products appear many unsafe hidden dangers, reduces the safety of Steel building accessories in use, and even affects normal use functions. It is recommended that the design unit not only put forward the painting requirements of the steel structure in the painting design description of the steel structure, but also put forward the maintenance and maintenance requirements of the Steel building accessories according to its use.

How to prevent Steel building accessories from rusting?

There are many ways to prevent Steel building accessories from rusting, and the following are usually used.

 The steel structure is made of alloy steel that is not easy to rust

 Chemical oxide layer protection method

 Using metal coating protection method

 Non-metallic coating protection law

In the later maintenance and maintenance process, non-metallic coating protection method is especially commonly used. The surface of the component is protected by paint and plastic, so that it does not contact the surrounding corrosive medium, so as to achieve the purpose of anti-corrosion. This method has good effect, low price, and has a wide range of paint varieties, a wide range of options, and strong applicability. It is not limited by the shape and size of the component. It can form a film with any shape on the surface of the component. The adhesion is firm. It can also follow the temperature change. The components are telescopic and easy to use. It is also possible to give the component a beautiful color.

Great products begin with the best engineering staff, and Qingdao Xinguangzheng Steel Structure Co., Ltd. is ready to assist you with your technical requirements for Steel building accessories.

Design Your Own Building Commercial Metal Buildings Types of Commercials Select your Styles and Applications Showing all 5 results SKU MBCC05 Commercial size 32′ wide x 64′ long x 12′ tall fully enclosed Width 32' Length 64' Height 12' Request Price Call 1-866-216-8499 SKU MBCC04 Commercial 44′ wide x 52′ long x 14′ tall fully enclosed Width 44'

The poultry house size: length: normally from 50 to 120m, width from 10m to 15m; height from 2.3m to 3.5m eave height. Application: Poultry Building Building Type: Steel Structure Poultry Farm Purlin: Steel Q235, Galvanization Roof

Structural steel fire protection can help ensure this. Exposure to fire can seriously damage the frame and lead to building collapse. While it may not melt until reaching more than 1,300°C1, structural steel will begin to weaken at about 300ºC and increases rapidly after 400ºC. At 550ºC steel loses approx. 40% of its load bearing strength.

Prefabricated houses price list Technologies details We use only high quality solid construction timber. Kiln dried, planed, finger-jointed solid wood of 13 meters enables us to deliver outstandingly stable wooden buildings of up to 3 floors. Learn more about production Technologies, reviews and more Downloads PDF catalog and more Manufacture

1/1/2001· With a span of 210 m, a height of 107 m, and a length of 363 m, the hanger will be one of the largest halls in the world. The central part of the hangar is of a cylindrical shape and consists of five steel arches covered with a textile membrane. At both ends of the building are the doors that consist of two fixed and six moving elements.

AGSI’s impressive, state of the art manufacturing plant is designed to produce premium quality steel billets to the highest levels of specifications. AGSI continuously strives for excellence throughout our business processes to ensure our steel billets meet the highest standards of our loyal and valued customers.

27/5/2022· Importing into the United States Publications Tags: Trade Last Modified: May 27, 2022 Click ‘Share This Page’ button to display social media links. Share This Page. Download Files Importing into the United States Importing into the U.S.pdf Return to top Travel ...

Our hangars built strong, super durable, reliable and flexible. As a result, we can offer the flexibility to add on to your hangar if the time comes later down the road. Speak to our specialists for more information on the scope of our designs. Our buildings are made using quality USA Standard Steel. All our Buildings are 100% Customizable!