Commercial steel building agent- China Manufacturers Suppliers Factory

Production introduction

Project Name: Sri Lanka Steel Structure Senior Resort Hotel

Project area: 110 square meter per unit

Project location: Sri lanka

Project Overview: As a second floor Resort, wall panel is cement sandwich panel as insulation, and the surface is painting with real stone paint. The roof is UPVC composite tile. Iron fences and stairs also is our company product.

 

 

What is the purpose of isolation?

The purpose of isolation is to cut off the route of transmission in the infection chain,protect susceptible persons, and ultimately control or eliminate the source of infection.

Therefore, it is an important measure to prevent the spread of infectious diseases.

 

 

From a medical point of view, the goal of "isolation" is to prevent the spread of infection and ultimately eliminate or control the source of infection.

That is to prevent and limit the infectious factors of infected patients directly

or indirectly to susceptible persons,

or to those who may pass on such factors to others, and at the same time, enable infected patients to receive timely treatment under control and return to health as soon as possible.

 

 

 

Why choose container house?

 

In the construction field, it is called an assembled modular container house, also known as a container building or a container house.

It is a single room as a prefabricated unit.

The external wall panels and interior decoration of each unit are shipped to the factory after completion.

A building structure to be installed on site.

 

 

 

Compared with the traditional building structure, the container house has the following advantages:

 

(1) Convenient transportation, installation and movement, flexible combination;

(2) The cost is low and it can be completed quickly;

(3) The house can be recycled, and no construction waste is generated during use;

(4) The interior is completely renovated and can be used immediately.

 

 

 

Admittedly, it is precisely because of the advantages of rapid assembly and baggage check-in that the container house can be delivered to the Huoshenshan (Fire God Mountain) hospital within 10 days.

 

Steel structure workshop is composed of frame, beam, wall and weighing column, etc. In the design of single-layer steel structure workshop, the first thing to ensure that the structure of the workshop does not affect the use of the second in the design time to calculate the bearing force of the beam, the selection of materials to meet the relevant standards.

Composition of single-layer steel structure workshop:

1. Transverse frame: composed of columns and the roof truss or roof beam supported by it, it is the main load-bearing system of the steel structure of single-storey workshop. It bears the dead weight of the structure, the wind and snow loads and the vertical and horizontal loads of the crane, and transfers these loads to the foundation.

2. Roof structure: structural system bearing roof load, including transverse frame beam, bracket, middle roof frame, skylight frame, purlin and so on.

3. Support system: including the support of the roof part and the support between columns. On the one hand, it forms the longitudinal frame of the steel structure of the single-storey workshop with columns and crane beams to bear the longitudinal horizontal load; On the other hand, the main load-bearing system is connected by individual plane structure into the whole structure of space, so as to ensure the necessary stiffness and stability of the steel structure of the single-storey workshop.

4. Crane beam and brake beam (or brake truss) : mainly bear the vertical and horizontal load of the crane, and transfer the load to the transverse frame and longitudinal frame.

5. Wall frame: Bear the dead weight and wind load of the wall.

Single-layer steel structure plant design points:

1. In the column network arrangement of single-storey steel structure buildings, when column spacing is not equal, especially the column spacing of each longitudinal column column, the columns should be arranged on the common horizontal positioning axis to ensure the stiffness requirements of the workshop, so that the workshop can be used normally.

2. For the temperature expansion joint section length of single-storey steel structure building, it is better to set the expansion joint when the plant structure exceeds the designed value under special circumstances. This has the advantage of being separated into independent structures, making temperature changes negligible after a drop.

3. The transverse frame calculation of single-storey steel structure building. The transverse frame structure transfers the load and action of the plant structure to the foundation, which is the main load-bearing structure of the plant.

4. Calculation of longitudinal force transmission system of single-storey steel structure building, steel column, column.

---

Qingdao Xinguangzheng steel structure group is a leading manufacture in China. With 25 years experience, we have confidence to provide you the highest cost performance.

The development of residential steel building conforms to the industrial technology policy of protecting arable land and saving energy, and is also one of the production methods for realizing residential industrialization. The development of steel structure housing is the general trend.

• What is the layout of the residential steel building?

• What issues should be paid attention to when designing residential steel building?

• Why pay attention to the design of residential steel building?

What is the layout of the residential steel building?

residential steel building’s column grid layout should be regular, and it is advisable to use residential units or sleeves as the unit to achieve modularity. The modular flat connection, wrong connection and symmetrical concave (convex) connection and other splicing adapt to changes in the overall layout .

When the residential steel building module adopts small column net, it should be combined with the floor and pipeline design; when the module adopts large column net, the facility pipeline should be designed as a fixed-positioned tube bundle, and the electrical and communication lines can be along the cavity and skirting of the partition wall. , Mirror hanging line or top line arrangement.

The kitchen and bathroom are located close to the concrete core tube or concrete shear wall, and avoid steel structure load-bearing components to facilitate the fire prevention and anti-corrosion treatment of steel components.

Vertical pipelines are centrally arranged in pipeline wells or pipeline walls, or installed on site using factory prefabricated tube bundles.

The toilet is drained on the same floor. Use a double pipe system for centralized heating, and use a temperature control valve and a heat meter. Use the equipotential characteristics of the steel structure to make a natural ground connection.

What issues should be paid attention to when designing residential steel building?

residential steel building should be dominated by construction and design, and other professions should interact closely with each other. In addition to following the general principles of residential building design, residential steel building must also focus on solving:

(1) How to make use of the advantages of steel structure? The beam span can be enlarged, the bays can be more flexible, and more space can be created for residents. But how to avoid the flatness and monotonous facade of the building caused by the steel structure.

(2) It is necessary to solve the fire protection and anti-corrosion problems of steel structure residential buildings. Especially in rainy areas, the quality of anti-corrosion and anti-rust work directly affects the promotion of steel structure housing.

Why pay attention to the design of residential steel building?

The cost of residential steel building is the most concerned issue of real estate developers. Steel structure residences should be positioned in middle and high-end residences. Steel structure residences are a systematic project. Management and coordination should be strengthened from design, manufacturing, transportation, installation, maintenance and management, so as to reduce costs and improve overall economic benefits. the goal of.

Qingdao Xinguangzheng Steel Structure Co., Ltd. strives to provide top-quality residential steel buildings with reasonable prices, efficient production time, and the most professional customer service.

Project information

15 seconds to show you the speed of XGZ Prefabricated building           

Total Building Area 3578.38 ㎡

200 Steel Columns          

55 Integrated Floor Slab          

Main Construction Completed in 15 days.

Description

Assembly new office building is a comprehensive project. Since the construction, through the development of detailed construction plan, it took only 4 months to complete the various links from the old Office demolition, civil construction, five floor platform assembly, curtain wall and maintenance plate installation, water supply and drainage circuit construction, elevator air conditioning installation and office building decoration, especially the five floor framework assembly link and decoration link which have exceeded the normal construction period On the basis of that, a breakthrough was made.

In the process of construction, all links are locked in close cooperation, construction and installation speed is fast, safety and quality are guaranteed, and a large number of assembly building installation technical details and practical experience have been accumulated.

Steel building accessories are constructed of steel materials. It is one of the main types of building structures. The structure consists mainly of steel bearings, steel columns, steel joints and other components made of profile steel and steel plates and uses rust removal and rust protection methods such as silylation, pure manganese phosphation, water washing and drying, galvanizing and so on.

How to use Steel building accessories?

Prefabricate and assemble Steel building accessories on the steel platform according to the installation sequence and process requirements to ensure the welding quality.

The spacing between the splicing joint of flange plate and web plate of section steel shall be greater than 200mm. The splicing length of flange plate shall not be less than 2 times of plate width; The web splicing width shall not be less than 300 mm and the length shall not be less than 600 mm.

In order to facilitate welding and ensure welding quality, the stiffener plates, connecting plates, base plates and cantilever beams (beams) on columns and beams shall be assembled and welded on the ground steel platform according to the dimensions of the construction drawing.

The Steel building accessories prefabricated on the steel platform shall not only be fabricated and assembled according to the construction drawings and specifications, but also consider the process of on-site installation and the change of installation size.

Why does Steel building accessories need post-maintenance?

Some Steel building accessories users do not know that steel structures still need to be maintained and maintained. As a result, there is serious corrosion that users often can't find out, which makes steel products appear many unsafe hidden dangers, reduces the safety of Steel building accessories in use, and even affects normal use functions. It is recommended that the design unit not only put forward the painting requirements of the steel structure in the painting design description of the steel structure, but also put forward the maintenance and maintenance requirements of the Steel building accessories according to its use.

How to prevent Steel building accessories from rusting?

There are many ways to prevent Steel building accessories from rusting, and the following are usually used.

 The steel structure is made of alloy steel that is not easy to rust

 Chemical oxide layer protection method

 Using metal coating protection method

 Non-metallic coating protection law

In the later maintenance and maintenance process, non-metallic coating protection method is especially commonly used. The surface of the component is protected by paint and plastic, so that it does not contact the surrounding corrosive medium, so as to achieve the purpose of anti-corrosion. This method has good effect, low price, and has a wide range of paint varieties, a wide range of options, and strong applicability. It is not limited by the shape and size of the component. It can form a film with any shape on the surface of the component. The adhesion is firm. It can also follow the temperature change. The components are telescopic and easy to use. It is also possible to give the component a beautiful color.

Great products begin with the best engineering staff, and Qingdao Xinguangzheng Steel Structure Co., Ltd. is ready to assist you with your technical requirements for Steel building accessories.

Introduction of Pakistan Prefabricated Steel Structure Construction Cola Workshop:

Project Area: 23408 sqm

Project Usage：Pakistan Cola workshop

Project Location: Lahore, Pakistan

Project weight of steel structures： 760 tons.

Project Detail:

Wall & Roof：0.5mm galvanized steel sheet +50mm glass wool+0.4mm galvanized steel sheet.

Span: Multi-Span 100m and 50m

Total Height: 12m

 

Project picture of Pakistan Prefabricated Steel Structure Construction Cola Workshop :

 

Company information

A brief introduction to you about our company first, then you can contact me if there is suitable project in the future.

1200 workers, 360000 ㎡ non-dust workshop, 25 years experience, CE, ISO9001, ISO9712, ISO3834, BV, SGS certificated, one hour reach Qingdao port, our company, as a manufacture, this is how we keep good quality and competitive prices for global valued customers.

We provide steel building design, farm house design, manufacture and installation service.

Industrial steel building is easy to move and recycle without pollution. These are stronger than traditional workshops, and the walls of the steel structure workshops can also be filled with bricks, which are completely load-bearing. All future plant constructions will be steel structure plants. Here we are going to introduce the steps of installing Industrial steel building.

• What are the raw materials used in industrial steel building?

• What is the main installation process of industrial steel building?

• What is the production and installation process of industrial steel building?

What are the raw materials used in industrial steel building?

In addition to iron and carbon, the raw materials of industrial steel building also contain other elements. Divided into permanent elements; occasional elements; hidden elements and alloying elements. The common elements are manganese, silicon, sulfur, and phosphorus. Incidental elements are due to the different origins of ore (there are intergrowth ore mixed with iron) and scrap steel as raw materials, such as copper, titanium, vanadium, rare earth elements, etc., are brought into steel during smelting and process operations. The cryptic elements refer to non-metal elements with a small atomic radius, such as oxygen and hydrogen. Alloying elements refer to elements specially added to change the composition, such as chromium, nickel, tungsten, molybdenum, vanadium, etc.

Carbon steel (referred to as carbon steel) is an iron-carbon alloy with a carbon content of more than 0.0218% and less than 2.11%. Because carbon steel has good mechanical properties and process properties, and is large in output and low in price, it is a metal material that is widely used in mechanical engineering. However, carbon steel also has some shortcomings, such as low hardening energy, poor temper softening resistance, and low yield ratio. The strength potential of carbon steel cannot be fully utilized even after heat treatment. In order to meet the continuous development of modern industry and science and technology, alloy steel was developed.

What is the main installation process of industrial steel building?

Foundation → production and installation foundation is divided into (foundation ground survey → foundation excavation → embedded screws → foundation casting → later foundation grouting → outdoor water dispersion → outdoor drainage ditch (some factory design indoor drainage ditch or cable ditch suggestion Completed simultaneously with installation)→Enclosure masonry→tiling tiles, etc.)

What is the production and installation process of industrial steel building?

The production and installation are divided into (processing production→component painting→structural pre-assembly→steel component hoisting→main structure adjustment→purlin installation→door and window column installation→gutter downpipe installation→steel component painting (some are fireproof, some are Anti-corrosion, according to design requirements) → roof panel (some with steel mesh, some with insulation layer, completed at the same time) → wall panel installation → door and window installation → water supply and drainage installation → electrical equipment installation)

Qingdao Xinguangzheng Steel Structure Co., Ltd., as a Chinese pioneer in producing Industrial steel buildings, can ensure the products’ quality and the after-sales service.

ALKAFAA is the largest distributor of pipes, welded pipes and allied components in the Kingdom. We offer a wide range of products, namely pipes and tubes, fittings, flanges, valves, stud bolts and gaskets. Sheets

Metal Building Outlet is a top supplier of quality Metal Buildings. Affordable prices on prefabricated metal buildings, shops and garage kits. Pinterest Youtube Instagram Call Now: 1.800.292.0111 (*All calls are recorded) ...

STEEL BUILDING KITS Home > Steel Buildings > Commercial Buildings 1 (800) 497-2135 contact@gwbuildings Mon - Fri | 8AM-5PM MST 3033 S. Parker Road Denver, Colorado 80014 REQUEST A QUOTE COMMERCIAL STEEL BUILDINGS Great Western Steel Building Systems has what it takes to see your commercial project through.

8/11/2022· Gary Stevens — Last Updated on November 8, 2022. After reviewing and comparing 16 website builders, our top 3 picks are Zyro, Wix, and Constant Contact for Canadians. Reasons to use a website builder: A website builder is astoundingly cheap when compared to individual developers. Website builders have gotten good.

17/10/2022· Al Kawther Steel

Without a doubt, whether the metric is net margin or balance sheet, the most profitable construction companies are full service type, providing“design, engineering, project mana

ASF is a steel fabrication company , joined the steel market in July 1997 as another successful venture within elsewedy industries group.

The Top 10 Warehousing companies in India are following: iThink logistics Aegis Logistics Ltd Allcargo Logistics Ltd Apollo LogiSolutions Ltd Container Corporation Of India Ltd Gati Ltd Mahindra Logistics Ltd Sical Logistics Ltd TCI Express Ltd Transport Corporation of India Ltd